Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06C
The AirTAC Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06C is a genuine double-acting ISO 15552 cylinder with a Ø32mm bore, 150mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke150 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC110V
- EntryTerminal
About the Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06C
The AirTAC SAIF32X150S-06C is a double-acting ISO 15552 profile cylinder equipped with a built-in 4M210-06 5/2 solenoid valve, delivering a Cv of 0.78. Driven by an AC110V terminal coil consuming 3.5 VA, it integrates switching directly on the actuator. The assembly operates within a 0.15-0.8 MPa pressure range, as the integrated valve limits the 1.0 MPa cylinder capacity. With a 32mm bore, it generates 402N of push force at 0.5 MPa.
This decentralized design eliminates remote valve plumbing, saving panel space and tubing. The manifold connects to the cylinder via an O8 x O5 PU tube, distinguishing the 1/8" valve port from the cylinder's 1/8" port. Factory-set to retract the rod when energised, the valve can be repositioned for extend-when-energised operation. The included -S magnet enables precise position detection with AirTAC CMSE reed and DMSE solid-state sensors.
Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06C Technical Specifications
| Model | Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06C |
|---|---|
| Series | SAIF ISO 15552 cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | G1/8 |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC110V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAIF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAIF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06C
| SAIF | ISO 15552 cylinder with built-in 4M valve. |
|---|---|
| 32×150 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| C | Coil voltage AC110V. |
| I / (blank) | Terminal electrical entry. |
SAIF does not hold its load without air — the valve routes air, it is not a lock. For load-holding use a SAIL (lock) or BSAI (clamp-lock).
Where the Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06C Is Used
Decentralized Stations
Perfect for large machines with decentralized stations, eliminating the need for long remote valve runs by self-switching via a single AC110V signal.
Space-Tight Machines
Ideal for compact assemblies where panel space is limited, integrating the 4M210-06 valve and cylinder into one self-contained package.
Retrofit Installations
Suits retrofits where running new valve tubing is costly, wiring a terminal coil directly to the actuator instead of plumbing air lines.
Is the Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06C the Right Choice?
Choose this 32mm bore when your application requires 402N push force at 0.5 MPa; stepping down is not an option in the SAIF range, but moving up to a 40mm bore provides 628N if higher payload capacity is needed. The SAIF32X150S-06C is ideal for decentralized stations where running separate valve tubing is costly, as one AC110V terminal coil signal drives the actuator directly. It includes a -S magnet for CMSE/DMSE sensors and uses PT threaded ports. To replace, match the 32mm bore, 150mm stroke, 06 (1/8") valve port, AC110V voltage, terminal entry, and magnet option. At a 150mm stroke, standard mounting is fine, but for any stroke over 300mm, consider external guide rails to prevent side-load wear. Remember that the 5/2 valve routes air but does not lock the load; for position holding, consider the SAIL series.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → SAIL / BSAI
Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06C FAQ
The 32mm bore generates 402N push and 345N pull force at 0.5 MPa. The built-in 4M210-06 5/2 valve has an effective area of 14.0 mm2 (Cv 0.78) and a maximum frequency of 5 cycles per second.
The integrated 5/2 valve holds its position via internal pilot pressure, not a spring. By default, the rod retracts when the AC110V coil is energised, but you can reposition the valve to extend-when-energised. The valve routes air but does not lock the load without live pressure.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAIF Series Standard Cylinder with Valve SAIF32X150S-06C
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.