Airtac SAUD Double Rod Cylinder SAUD100X175S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD100X175S is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 175mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke175 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X175S
The AirTAC SAUD100X175S is a double-acting, double-rod profile cylinder. A 25 mm rod exits both ends of the hard-anodized aluminum extruded barrel, meaning both faces use the rod-side area. This yields exactly 3681 N of force each way at 0.5 MPa. The 1/2 inch port feeds the 100 mm bore, and the unit is shorter than an ISO 15552 cylinder of the same size.
Because the rear rod protrudes, it easily carries a switch cam for position sensing. This specific SAUD100X175S variant includes the -S magnet for CMSG, DMSG, or EMSG switches. For high-temperature environments up to 150 C, specify the Viton H seal option.
Airtac SAUD Double Rod Cylinder SAUD100X175S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X175S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X175S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X175S Is Used
Twin-Spindle Machining
Drives two opposing machining heads simultaneously with perfectly balanced 3681 N thrust in both directions to prevent workpiece distortion.
Dual-End Transfer
Shifts pallets from one conveyor lane to another using tooling attached to both rod ends, ensuring synchronized part flow without twisting.
Symmetric Clamp Press
Applies equal clamping pressure from both sides of an assembly fixture, using the rear rod cam to trigger a CMSG sensor at the precise center point.
Is the Airtac SAUD Double Rod Cylinder SAUD100X175S the Right Cylinder?
Select this 100 mm bore model when your application demands equal push and pull thrust, such as driving twin tooling or preventing rotation without external guides. If you need less force, the 80 mm bore delivers 2268 N each way at 0.5 MPa. If you require more, confirm larger custom options. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. The included -S magnet enables electronic or reed sensing. Since the 175 mm stroke is under 300 mm, side-load guide requirements are minimal, but always support heavy loads to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X175S FAQ
The force is equal in both directions because the 25 mm rod exits both ends. It generates 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The 1/2 inch port supplies air to achieve these figures.
No, a plain double-rod cylinder drifts without live air, as the adjustable 29 mm cushions only decelerate near stroke end. For secure load holding, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X175S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.