Airtac SAUD Double Rod Cylinder SAUD100X190
The AirTAC Airtac SAUD Double Rod Cylinder SAUD100X190 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 190mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke190 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X190
The AirTAC SAUD100X190 is a double-acting, double-rod profile cylinder. A 25 mm rod exits both ends of the hard-anodized aluminum barrel, meaning both faces use the rod-side piston area. This yields equal push and pull force of 3681 N each way at 0.5 MPa. The unit carries a 1/2 inch port and M20x1.5 rod threads.
This extruded profile body is shorter than a standard ISO 15552 cylinder of the same 100 mm bore, saving machine space. It runs at 30-800 mm/s with 29 mm adjustable air cushions at both ends. This SKU lacks a magnet, so it cannot accept CMSG or DMSG sensors.
Airtac SAUD Double Rod Cylinder SAUD100X190 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X190 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X190
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X190 Is Used
Twin-Tool Stamping
Drives two synchronized forming tools from one piston, utilizing the equal force on both strokes for matched metalworking pressure.
Anti-Rotation Diverter
Uses the dual rods to prevent mechanical twist while pushing heavy packages across a high-speed sorting line.
Is the Airtac SAUD Double Rod Cylinder SAUD100X190 the Right Cylinder?
Choose this 100 mm bore if you need substantial equal-both-ways thrust. Stepping down, the 80 mm bore provides 2268 N at 0.5 MPa, while no larger standard bore exists in this series. The double-rod architecture is ideal when you need anti-rotation guidance, want to drive two tools at once, or need a back rod to trip a switch. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. At 190 mm stroke, side loads are moderate, but always use external guide rails for heavy off-center loads. Remember that a plain cylinder drifts without live air; use an external rod lock or pilot-operated check valve for secure load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X190 FAQ
The force is equal in both directions because a rod exits both ends. It generates 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa.
No, this specific SKU lacks the internal magnet. You cannot mount CMSG, DMSG, or EMSG sensors on it; you would need the -S variant for switch readiness.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X190
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.