Airtac SAUD Double Rod Cylinder SAUD100X195
The AirTAC Airtac SAUD Double Rod Cylinder SAUD100X195 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 195mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke195 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X195
The AirTAC SAUD100X195 is a double-acting, double-rod profile cylinder. A 25 mm rod protrudes from both ends of the hard-anodized aluminum extruded barrel, meaning both faces use the rod-side area. This yields exactly 3681 N of thrust and pull each way at 0.5 MPa. The unit is notably shorter than an ISO 15552 cylinder of the same bore.
Because the piston travels symmetrically, this 100 mm bore design provides excellent anti-rotation stability and can drive twin tool stations simultaneously. It uses a 1/2 inch port and M20x1.5 rod threads. Standard seals handle -20 to +70 C, while a Viton H option extends this to 150 C.
Airtac SAUD Double Rod Cylinder SAUD100X195 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X195 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X195
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X195 Is Used
Twin-Spindle Drilling
Drives two synchronized machining spindles from one piston, ensuring both holes are bored simultaneously without rotational twist.
Dual Transfer Pushers
Pushes pallets from either side of a belt using both rod ends, maintaining parallel contact to prevent carton skewing.
Heavy Load Lifters
Raises 188 kg vertical loads in packaging lines, using the equal push and pull force to raise and lower tooling smoothly.
Is the Airtac SAUD Double Rod Cylinder SAUD100X195 the Right Cylinder?
Select this 100 mm bore model when your mechanism requires strict non-rotating guidance or synchronized twin-tool actuation across its 195 mm stroke. Stepping down, the 80 mm bore provides 2268 N equal force each way; stepping up is not possible as 100 mm is the largest in the series. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. Since this 195 mm stroke is below 300 mm, side-load guidance is less critical, but external rails should still carry heavy bending loads. This specific SKU lacks a magnet (-S), so it cannot accept CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X195 FAQ
The force is equal in both directions because the 25 mm rod exits both ends. It generates 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. We never quote a larger single-rod push value for this double-acting profile cylinder.
No, a plain cylinder drifts without live air, as the 29 mm adjustable cushion only decelerates near stroke end. For load holding, install an external rod lock or pilot-operated check valve. Also note this non-magnetic SKU cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X195
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.