Airtac SAUD Double Rod Cylinder SAUD100X195S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD100X195S is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 195mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke195 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X195S
The AirTAC SAUD100X195S is a double-acting, double-rod profile cylinder. A 25 mm rod protrudes from both ends of the hard-anodized aluminum extruded barrel, meaning both faces use the rod-side area. This yields exactly 3681 N of thrust and pull at 0.5 MPa, with the 1/2 inch port supplying ample air volume.
Because the body is a profile extrusion rather than a legacy format, it is physically shorter than an ISO 15552 unit of the same 100 mm bore. The -S suffix confirms a built-in piston magnet for CMSG, DMSG or EMSG switches.
Airtac SAUD Double Rod Cylinder SAUD100X195S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X195S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X195S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X195S Is Used
Twin-Spindle Machining
Drives two opposing machining heads simultaneously with identical 3681 N force, keeping cycle times synchronized.
Dual Transfer Pushers
Pushes parts from both ends of a conveyor lane using a single piston, ensuring perfectly balanced material handling.
Vertical Lift Fixture
Lifts heavy pallets straight up and down with equal force, using the twin rods to prevent rack twist during elevation.
Is the Airtac SAUD Double Rod Cylinder SAUD100X195S the Right Cylinder?
Choose this 100 mm bore when an application demands 3681 N of equal force in both directions. If you need less power, step down to the 80 mm bore delivering 2268 N. If you need more, there is no larger standard SAUD bore. The double-rod architecture is ideal for anti-rotation guidance, driving twin tooling, or mounting a switch cam on the back rod. You can mount it using basic, FA flange or LB foot brackets, all compatible with the AirTAC SC series. The 195 mm stroke is well under the 1500 mm maximum, so no external guide is strictly required, but always support heavy side loads. The -S magnet allows solid state or reed sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X195S FAQ
The force is equal in both directions because a 25 mm rod exits both ends. It produces 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The 1/2 inch port feeds the 100 mm bore to maintain speeds of 30-800 mm/s.
No, a plain SAUD cylinder will drift without live air. The adjustable 29 mm cushions only decelerate the piston near the stroke ends and do not act as a brake. For secure load holding, you must install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X195S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.