Airtac SAUD Double Rod Cylinder SAUD100X200
The AirTAC Airtac SAUD Double Rod Cylinder SAUD100X200 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 200mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke200 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X200
The AirTAC SAUD100X200 is a double-acting, double-rod profile cylinder featuring a 100mm bore and 200mm stroke. A 25mm rod exits both ends, meaning the push and pull forces are identical at 3681 N each way at 0.5 MPa. The extruded aluminum barrel keeps the unit shorter than an ISO 15552 cylinder of the same bore.
This SKU lacks a magnet (-S), so it cannot accept CMSG or DMSG sensors. With a 1/2" port and M20x1.5 rod thread, it handles heavy loads. For high-heat environments up to 150 C, specify the Viton H seal option.
Airtac SAUD Double Rod Cylinder SAUD100X200 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X200 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X200
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X200 Is Used
Twin-Tool Stamping
Drives two synchronized forming tools simultaneously from opposite rod ends, ensuring perfectly balanced striking force without twist.
Dual-End Diverting
Pushes product lanes from both sides of a transfer line, using the equal 3681 N force to shift heavy pallets cleanly in either direction.
Balanced Lift Platform
Raises and lowers a heavy machining sub-assembly with identical force both up and down, preventing gravitational sag during upward travel.
Is the Airtac SAUD Double Rod Cylinder SAUD100X200 the Right Cylinder?
Choose this 100mm bore if your application requires 3681 N of equal bidirectional force at 0.5 MPa. If you need less power, the 80mm bore provides 2268 N both ways; if you need more, confirm from datasheet for custom setups. A double rod is the right call for anti-rotation guidance, driving twin tooling, or mounting a cam on the back rod. Mounting is limited to Basic, FA flange, and LB foot styles compatible with the AirTAC SC series. Because this stroke is under 300mm, side-load guide concerns are minimal, but always align the load. Remember that a plain cylinder drifts without air; use an external rod lock for held loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X200 FAQ
Because the 25mm rod exits both ends, the force is equal in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. It uses a 1/2" port.
No, this specific SKU does not include a magnet (-S), so it cannot trigger CMSG or DMSG switches. You would need the -S variant for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.