Airtac SAUD Double Rod Cylinder SAUD100X220
The AirTAC Airtac SAUD Double Rod Cylinder SAUD100X220 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 220mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke220 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X220
The AirTAC SAUD100X220 is a double-acting, double-rod profile cylinder. A 25mm rod exits both ends of the hard-anodized aluminum barrel, meaning push and pull forces are identical at 3681N each way at 0.5MPa. The extruded profile body is noticeably shorter than a standard ISO 15552 unit of the same 100mm bore, and it uses a 1/2 inch port with M20x1.5 rod threads.
Because the twin rods resist torsional twist, this model suits synchronized lifting and twin-tool driving. Note that this specific SKU lacks a magnet, so it cannot host CMSG or DMSG sensors. For high-heat environments up to 150C, specify the Viton H seal option.
Airtac SAUD Double Rod Cylinder SAUD100X220 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X220 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X220
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X220 Is Used
Synchronized Lifting Jig
Uses the twin rods to raise heavy pallets evenly without torsional deflection, relying on the 3681N equal force to prevent load tilting.
Twin-Tool Punching Station
Drives two separate forming tools at opposite ends simultaneously, capitalizing on the compact profile body to save machine floor space.
Dual-End Diverting Gate
Actuates a routing flap from either side of the belt, ensuring stable product transfer without needing a secondary guide rail.
Is the Airtac SAUD Double Rod Cylinder SAUD100X220 the Right Cylinder?
Select this 100mm bore, 220mm stroke model when your mechanism requires strict anti-rotation guidance or drives two tools simultaneously. If you need less force, the 80mm bore delivers 2268N both ways at 0.5MPa; if your application demands more, this 100mm bore provides 3681N. Mounting is limited to Basic, FA flange, and LB foot styles, matching AirTAC SC series hole patterns. Because the 220mm stroke is under 300mm, side-load stress is minimal, but always guide the load externally for smooth operation. Choose a version with the -S suffix if you require magnetic sensing, as this base unit cannot accept switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X220 FAQ
The force is equal in both directions because of the double-rod design. It outputs 3681N at 0.5MPa, 5153N at 0.7MPa, and 6626N at 0.9MPa. It uses a 1/2 inch port and never quotes a larger single-rod push value.
No, a plain double-rod cylinder drifts without live air, as the adjustable 29mm cushions only decelerate the piston near stroke end. For secure load holding, you must install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X220
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.