Airtac SAUD Double Rod Cylinder SAUD100X30
The AirTAC Airtac SAUD Double Rod Cylinder SAUD100X30 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 30mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke30 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X30
The AirTAC SAUD100X30 is a double-acting, double-rod profile cylinder. A 25mm rod exits both ends, meaning push and pull forces are equal at 3681 N each way at 0.5 MPa. The extruded aluminum profile keeps the unit shorter than an ISO 15552 cylinder of the same 100mm bore.
A high-temperature Viton H seal option extends operation to 150 C. Because this SKU lacks the -S magnet, it cannot accept CMSG or DMSG sensors.
Airtac SAUD Double Rod Cylinder SAUD100X30 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X30 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X30
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X30 Is Used
Twin-Tool Stamping
Drives two synchronized forming tools from opposite rod ends to double output without adding a second actuator.
Dual-End Diverters
Pushes a lane guide from either side to re-route heavy pallets with equal 3681 N force in both directions.
Anti-Twist Lifts
Uses the dual rods to prevent mechanical rotation when elevating wide fixtures in compact assembly cells.
Is the Airtac SAUD Double Rod Cylinder SAUD100X30 the Right Cylinder?
Choose this 100mm bore when you need 3681 N of equal bidirectional force. If you need less power, the 80mm bore delivers 2268 N. If you need more, no larger standard bore exists in this series. A double rod is ideal for anti-rotation guidance or driving twin tools. Mounting uses SC-series FA or LB brackets. Since this non-magnetic SKU cannot carry a switch, mount external sensors if needed. For any stroke over 300mm, add external guide rails to prevent side-load wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X30 FAQ
The force is equal both ways: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. It never outputs a larger single-rod push value.
No. The air cushions only decelerate near stroke end; they do not lock. For load holding on air loss, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.