Airtac SAUD Double Rod Cylinder SAUD100X35
The AirTAC Airtac SAUD Double Rod Cylinder SAUD100X35 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 35mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke35 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X35
The AirTAC SAUD100X35 is a double-acting double-rod profile cylinder featuring a 100mm bore and 35mm stroke. Because a rod exits both ends, the push and pull force is equal, delivering 3681 N each way at 0.5 MPa. The extruded hard-anodized aluminum barrel keeps the unit shorter than a standard ISO 15552 cylinder of the same bore. It uses a 1/2 inch port and an M20x1.5 rod thread.
This twin-rod design provides rigid anti-rotation guidance and lets you mount tooling on both faces simultaneously. This SKU has no magnet, so it cannot accept CMSG or DMSG sensors. For high-heat environments up to 150 C, specify the Viton H seal option.
Airtac SAUD Double Rod Cylinder SAUD100X35 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X35 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X35
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X35 Is Used
Twin-Spindle Drilling
Drives two synchronized machining spindles from opposite rod ends to cut opposing parts simultaneously without rotational play.
Dual Pusher Array
Pushes cartons from both sides of a roller section using the equal bidirectional thrust to keep items centered during sorting.
Heavy Stamper
Delivers 3681 N of equal pressing force downward and retracts smoothly using the 29mm adjustable air cushions at both ends.
Is the Airtac SAUD Double Rod Cylinder SAUD100X35 the Right Cylinder?
Choose this 100mm bore if your application requires the maximum equal-both-ways thrust of 3681 N at 0.5 MPa. If you need less force, step down to the 80mm bore which provides 2268 N both ways. This double-rod build is ideal when you need strict anti-twist guidance or want to drive two tools at once. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. Because this SKU lacks the -S magnet, you cannot mount position sensors; if you need switching, select a -S variant. At a 35mm stroke, side-load risk is minimal, but always support external guide rods for heavier off-center loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X35 FAQ
The force is equal in both directions because it is a double-rod design. It outputs 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The 1/2 inch port supplies air to both chambers to generate this thrust.
No, a plain double-rod cylinder drifts without live air; the adjustable cushions only decelerate near stroke end and do not act as a brake. For load holding, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.