Airtac SAUD Double Rod Cylinder SAUD100X600
The AirTAC Airtac SAUD Double Rod Cylinder SAUD100X600 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 600mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke600 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X600
The AirTAC SAUD100X600 is a double-acting, double-rod profile cylinder featuring a 100mm bore and 600mm stroke. A 25mm rod exits both ends, meaning push and pull forces are identical at 3681 N each way at 0.5 MPa. The extruded aluminum barrel is shorter than an ISO 15552 cylinder of the same bore. It uses a 1/2 inch port and M20x1.5 rod threads.
This SKU lacks a magnet and cannot take a sensor. The 29mm adjustable air cushions only decelerate the piston near stroke end; they do not hold the load. For secure load holding on air loss, use an external rod lock or pilot-operated check valve. The Viton H seal option raises operating temperature to 150 C.
Airtac SAUD Double Rod Cylinder SAUD100X600 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X600 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X600
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X600 Is Used
Twin-Tool Machining
Drives two opposing machining heads simultaneously with equal 3681 N force, ensuring balanced material removal without rotational twist.
Synchronized Lift Station
Lifts heavy 188 kg vertical loads using both rod ends, keeping the payload perfectly aligned and preventing sagging over the 600mm travel.
Dual-End Transfer
Pushes a product from one conveyor belt to another in a single stroke, using the rear rod to trip a mechanical valve cam at the same time.
Is the Airtac SAUD Double Rod Cylinder SAUD100X600 the Right Cylinder?
When sizing this double-rod unit, compare both ways: stepping down to the 80mm bore yields 2268 N equal force, while this 100mm bore provides 3681 N. Choose the double-rod layout for anti-rotation guidance, driving twin tooling, or mounting a switch cam on the back rod. Mounting is limited to Basic, FA, and LB types compatible with the AirTAC SC series. Because the 600mm stroke exceeds 300mm, add external guides to prevent rod bending under side loads. To add sensors, select the -S magnet version, as this base SKU cannot accept a switch.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X600 FAQ
The force is equal both ways because the 25mm rod exits both ends. It outputs 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The 1/2 inch port supplies air to achieve these figures.
No, this specific SKU does not include a magnet. You must select the -S option if you need to mount CMSG, DMSG, or EMSG sensors for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X600
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.