Airtac SAUD Double Rod Cylinder SAUD100X600S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD100X600S is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 600mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke600 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X600S
The AirTAC SAUD100X600S is a double-acting, double-rod profile cylinder. A rod protrudes from both ends, meaning both faces use the rod-side piston area. This yields equal force in both directions, delivering 3681 N each way at 0.5 MPa. The extruded aluminum profile barrel keeps the unit shorter than an ISO 15552 cylinder of the same bore.
This 100mm bore unit features a 1/2" port, M20x1.5 rod thread, and adjustable air cushions at 29mm. The -S suffix denotes a built-in magnet for CMSG, DMSG, or EMSG switches. A high-temp Viton H seal option extends operation to 150 C.
Airtac SAUD Double Rod Cylinder SAUD100X600S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X600S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X600S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X600S Is Used
Twin-Tool Machining
Drives two opposing machining heads simultaneously with perfectly balanced 3681 N force to ensure parallel cutting operations.
Anti-Rotation Lifting
Lifts heavy vertical loads up to 188 kg safely, using the dual rods to prevent mechanical twist and maintain precise load alignment.
Cam-Triggered Sorting
Uses the extended back rod to trip an external CMSG or DMSG sensor cam, confirming full extension on high-speed packaging lines.
Is the Airtac SAUD Double Rod Cylinder SAUD100X600S the Right Cylinder?
Choose this 100mm bore if your task demands equal push and pull thrust, such as anti-rotation guidance or driving twin tooling simultaneously. The back rod can also carry a switch cam. If you need less force, the 80mm bore provides 2268 N each way at 0.5 MPa. If you need more, confirm from datasheet for larger custom setups. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. Because the 600mm stroke is long, always use external guides to prevent rod bending and side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X600S FAQ
Because it is a double-rod cylinder, the force is equal in both directions. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The unit features a 1/2" port and a 25mm rod.
No, a plain cylinder drifts without live air, as the air cushion only decelerates near stroke end. For a held load, install an external rod lock or a pilot-operated check valve. The -S magnet enables electronic position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X600S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.