Airtac SAUD Double Rod Cylinder SAUD100X65
The AirTAC Airtac SAUD Double Rod Cylinder SAUD100X65 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 65mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke65 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X65
The AirTAC SAUD100X65 is a double-acting, double-rod profile cylinder. A 25mm rod exits both ends, meaning push and pull forces are identical at 3681N each way at 0.5MPa. The extruded aluminum barrel keeps the unit shorter than an ISO 15552 cylinder of the same bore. It features a 1/2 inch port and M20x1.5 rod threads.
The 29mm adjustable air cushions at both ends manage end-of-stroke deceleration. This SKU lacks a magnet, so it cannot accept CMSG or DMSG sensors. For high-heat environments up to 150C, specify the Viton H seal option.
Airtac SAUD Double Rod Cylinder SAUD100X65 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X65 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X65
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X65 Is Used
Twin-Spindle Machining
Drives two synchronized machining heads from one piston, ensuring perfectly balanced cutting forces without torsional twist.
Dual Transfer Pushers
Pushes pallets from either end simultaneously, maintaining straight-line tracking and preventing material jams on the belt.
Symmetric Lift Platforms
Raises and lowers heavy staging platforms with equal push and pull power, keeping the load perfectly level during transit.
Is the Airtac SAUD Double Rod Cylinder SAUD100X65 the Right Cylinder?
Choose this 100mm bore if you need substantial equal force both ways for anti-rotation or twin-tool tasks. Stepping down, the 80mm bore yields 2268N at 0.5MPa, while this 100mm unit provides 3681N. Mounting is limited to Basic, FA, and LB types, matching the AirTAC SC series. Since this specific SKU lacks the -S magnet, it cannot support magnetic sensing. At a 65mm stroke, side loads are minimal, but external guides are always recommended for stability. Remember that the air cushion only decelerates; use an external rod lock or pilot-operated check valve to hold a load securely on air loss.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X65 FAQ
Because the 25mm rod exits both ends, the force is equal in both directions. It generates 3681N at 0.5MPa, 5153N at 0.7MPa, and 6626N at 0.9MPa. The 1/2 inch port supplies air to achieve these figures.
No, this specific SKU does not include a magnet. You must select an SAUD model with the -S suffix to use CMSG, DMSG, or EMSG magnetic switches along the profile barrel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X65
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.