Airtac SAUD Double Rod Cylinder SAUD100X700
The AirTAC Airtac SAUD Double Rod Cylinder SAUD100X700 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 700mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke700 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X700
The AirTAC SAUD100X700 is a double-acting, double-rod profile cylinder featuring a 100mm bore and 700mm stroke. Because a rod protrudes from both ends, the push and pull forces are identical, delivering 3681 N each way at 0.5 MPa. The extruded hard-anodized aluminum barrel keeps the unit shorter than a standard ISO 15552 cylinder of the same bore.
This model uses a 1/2 inch port and an M20x1.5 rod thread. The 29mm adjustable air cushions at both ends manage end-of-stroke impact. Note that this specific SKU lacks a magnet, meaning it cannot accept CMSG, DMSG, or EMSG sensors.
Airtac SAUD Double Rod Cylinder SAUD100X700 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X700 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X700
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X700 Is Used
Twin-Tool Machining
Drives two opposing machining heads simultaneously with perfectly synchronized motion and equal 3681 N force on both faces.
Dual-End Transfer
Pushes a product across a conveyor belt on the forward stroke while retracting a secondary mechanism at the same speed.
Anti-Rotation Lifting
Lifts heavy vertical loads up to 188 kg using the dual rods to prevent mechanical twist and maintain precise guidance.
Is the Airtac SAUD Double Rod Cylinder SAUD100X700 the Right Cylinder?
Choose the SAUD100X700 when your application demands equal force in both directions, such as driving twin tooling or utilizing the back rod to trip a mechanical switch. For lighter loads, the 80mm bore provides 2268 N both ways; for heavier duty, this 100mm bore is the maximum available. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. Because the 700mm stroke is relatively long, external guides are strongly recommended to prevent rod bending and manage side loads. If you require position sensing, select the -S magnet version instead of this plain SKU.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X700 FAQ
The force is equal in both directions because it is a double-rod design. It outputs 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The 1/2 inch port supplies air to both chambers equally.
No, this SKU lacks a magnet (-S) and cannot accept sensors. Additionally, a plain cylinder drifts on air loss; the 29mm cushions only decelerate at stroke end. Use an external rod lock or pilot-operated check valve for load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X700
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.