Airtac SAUD Double Rod Cylinder SAUD100X750
The AirTAC Airtac SAUD Double Rod Cylinder SAUD100X750 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 750mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke750 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X750
The AirTAC SAUD100X750 is a double-acting, double-rod profile cylinder featuring a 100mm bore and 750mm stroke. Because a rod protrudes from both ends, the push and pull force is equal, delivering 3681 N each way at 0.5 MPa. The extruded hard-anodized aluminum barrel makes it shorter than an ISO 15552 cylinder of the same bore. It uses a 1/2 inch port and an M20x1.5 rod thread.
This twin-rod layout provides anti-rotation guidance and lets you mount twin tooling or a sensor cam on the back rod. A high-temperature Viton H seal option extends operation to 150 C. Note this SKU lacks a magnet, so it cannot take CMSG or DMSG switches.
Airtac SAUD Double Rod Cylinder SAUD100X750 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X750 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X750
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X750 Is Used
Twin-Spindle Machining
Drives two synchronized machining heads from one piston, using the equal both-ways force to maintain balanced cutting feed on opposing workpieces.
Dual-End Transfer
Pushes a transfer carriage in one direction while simultaneously retracting a return fixture on the back rod, keeping cycle times perfectly matched.
Vertical Lift Station
Raises a 188 kg payload using the 0.5 MPa equal force, relying on the twin rods to prevent platform twist during the 750 mm elevation.
Is the Airtac SAUD Double Rod Cylinder SAUD100X750 the Right Cylinder?
Select this 100mm bore model when your application demands equal force both ways, needing 3681 N at 0.5 MPa. If you need less thrust, the 80mm bore provides 2268 N. If you need more, the 100mm is the largest standard SAUD size available. The double-rod design is ideal for anti-rotation, twin tooling, or back-end cam duties. Mounting is limited to Basic, FA, and LB types, matching the AirTAC SC series. Because the stroke is 750mm, you must use external guides to prevent rod bending and manage side loads. This non-magnet version cannot host sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X750 FAQ
The force is equal in both directions because it is a double-rod cylinder. It outputs 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The 1/2 inch port supplies air to both chambers equally.
No, a plain double-rod cylinder drifts without live air, as the adjustable 29 mm cushions only decelerate near stroke end. For load holding, install an external rod lock or pilot-operated check valve. Also, this non-S SKU lacks a magnet and cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X750
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.