Airtac SAUD Double Rod Cylinder SAUD100X95
The AirTAC Airtac SAUD Double Rod Cylinder SAUD100X95 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 95mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke95 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X95
The AirTAC SAUD100X95 is a double-acting, double-rod profile cylinder. A rod exits both ends, meaning the push and pull output is identical at 3681 N each way at 0.5 MPa. The extruded aluminum barrel keeps the unit shorter than an ISO 15552 cylinder of the same bore. This 100mm bore version uses a 1/2 inch port and a 25mm rod with an M20x1.5 thread.
Because the piston travels 95mm, side loads remain manageable without external guides. The equal force makes it ideal for synchronized dual-tool work. Note this SKU lacks a magnet, so it cannot accept CMSG or DMSG sensors.
Airtac SAUD Double Rod Cylinder SAUD100X95 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X95 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X95
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X95 Is Used
Twin-Tool Stamping
Drives two identical forming tools simultaneously from opposite rod ends, ensuring perfectly synchronized press cycles.
Anti-Rotation Diverter
Uses the dual rods to prevent twist during high-speed package diverting on a sorting line, eliminating the need for external linear bearings.
Dual-End Lift Fixture
Lifts heavy pallets using both rod ends to push and pull a lifting carriage with equal 3681 N force in both directions.
Is the Airtac SAUD Double Rod Cylinder SAUD100X95 the Right Cylinder?
Choose this 100mm bore when you need 3681 N of equal bidirectional force. If you need less power, step down to the 80mm bore which provides 2268 N both ways. If you require more, no larger standard bore exists in this range. The twin-rod architecture is the right call for anti-rotation guidance or carrying a switch cam on the back rod. Mounting is limited to Basic, FA, and LB types, matching the AirTAC SC series. Since this specific SKU has no magnet, you cannot mount sensors. For any stroke over 300mm, add external guide rails to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X95 FAQ
The force is equal in both directions due to the double-rod design. It outputs 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The 1/2 inch port feeds both chambers equally.
No, a plain cylinder drifts when air is removed; the adjustable 29mm cushions only decelerate near the stroke end. For load holding, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X95
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.