Airtac SAUD Double Rod Cylinder SAUD100X95S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD100X95S is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 95mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke95 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X95S
The AirTAC SAUD100X95S is a double-acting, double-rod profile cylinder. A 25mm rod exits both ends of the hard-anodized aluminum extruded barrel, meaning both faces use the rod-side area. Output is equal in both directions at 3681 N each way at 0.5 MPa. The 1/2 inch port feeds this 100mm bore unit, which is shorter than a standard ISO 15552 cylinder of the same size.
This model includes a built-in piston magnet (-S) for CMSG, DMSG or EMSG switches. The twin rods provide anti-rotation guidance and let you mount a sensor cam on the back rod. A Viton H seal option raises the operating ceiling to 150 C.
Airtac SAUD Double Rod Cylinder SAUD100X95S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X95S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X95S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X95S Is Used
Twin-Spindle Machining
Drives two synchronized machining heads from one piston, using the equal force both ways to push and retract tools simultaneously.
Dual Transfer Arms
Moves parts across a belt using dual tooling mounted to both rod ends, ensuring balanced pick-and-place without rotation.
Is the Airtac SAUD Double Rod Cylinder SAUD100X95S the Right Cylinder?
Selecting this 100mm bore double-rod cylinder is ideal when you need synchronized motion, twin tooling, or non-rotating anti-twist guidance. It produces 3681 N both ways at 0.5 MPa. If you need less force, step down to the 80mm bore which yields 2268 N both ways. If you need more, there is no larger standard SAUD bore. Mounting is limited to Basic, FA, and LB types, matching the AirTAC SC series. The -S magnet allows electronic or reed sensing. For this 95mm stroke, side loads are minimal, but always use external guides for strokes over 300mm. Note that a plain cylinder drifts without live air; use an external rod lock for load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X95S FAQ
Because the 25mm rod exits both ends, the force is equal in both directions. It outputs 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The 1/2 inch port supplies air to the 100mm bore.
No, a plain double-rod cylinder drifts without live air. The adjustable 29mm cushions only decelerate near stroke end. For load holding, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X95S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.