Airtac TN Double Axis Double Rod Cylinder TN10X60SH
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN10X60SH is a genuine TN twin-rod (double-rod) double-acting cylinder, 10 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 78.6 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore10 mm
- Push thrust @0.5 MPa78.6 N
- Operating pressure0.2 - 1.0 MPa (29 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
About the Airtac TN Double Axis Double Rod Cylinder TN10X60SH
A twin-rod cylinder uses two parallel rods on a shared plate to resist bending and twisting, so the load moves without rotating. The TN10X60SH gives a 10mm bore with a 60mm stroke; at 0.5 MPa its theoretical push thrust is 78.5 N, and an external bumper cushions each impact while trimming the stroke by 0 to -5 mm.
This is a genuine AirTAC part built to the enterprise standard with a typical aluminium-alloy body. A magnet is fitted as standard for position sensing, with switch slots around the body. We confirm dimensions and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN10X60SH Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN10X60SH |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 10 mm |
| Push thrust @0.5 MPa | 78.6 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 1.0 MPa (29 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Match the bore to the force you need: the 10mm bore delivers a theoretical 78.5 N push at 0.5 MPa. TN follows the enterprise standard with PT threads only, while TR adds JIS mounting, higher non-rotating precision, and G or NPT thread options. Stay within the bore's rated stroke range; over-long strokes strain the short cover. Ask us to check your side-load conditions before you commit.
Applications
Push-Off Station
Knock finished parts off a conveyor belt at the end of a line; the twin rods keep the pusher plate square and prevent skewing as each part clears the lane.
Clamp Fixture
Hold a workpiece flat against a machining datum; the dual rods stop the clamp arm from rotating so clamping force stays even across the part face.
Transfer Gate
Slide a diverter gate between two lanes on a packaging line; the anti-rotation design keeps the gate aligned without needing a separate linear guide.
FAQ
What thrust does the TN10 bore produce?
At 0.5 MPa the 10mm bore gives a theoretical push thrust of 78.5 N. The pull side is lower because the rods subtract piston area. Confirm your working pressure and load margin with us before ordering.
How does the bumper cushion work?
Each TN cylinder uses an external front bumper, not an air cushion. The bumper absorbs impact and lets you adjust the effective stroke by 0 to -5 mm. We can confirm cushioning suitability for your cycle speed from the datasheet.