Airtac TN Double Axis Double Rod Cylinder TN10X85S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN10X85S is a genuine TN twin-rod (double-rod) double-acting cylinder, 10 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 78.6 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore10 mm
- Push thrust @0.5 MPa78.6 N
- Operating pressure0.2 - 1.0 MPa (29 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
About the Airtac TN Double Axis Double Rod Cylinder TN10X85S
A twin-rod cylinder runs two parallel rods on one shared plate so the load resists bending and twisting and moves without rotating. The TN10X85S pairs a 10mm bore with an 85mm stroke, giving a theoretical push thrust of 78.5 N at 0.5 MPa. An external bumper cushions impact and lets you trim stroke across a -5 to 0 mm range.
This is a genuine AirTAC part built to the enterprise standard, with a magnet fitted as standard for position sensing through slots around the body. We confirm dimensions, sizing, and side-load limits from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN10X85S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN10X85S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 10 mm |
| Push thrust @0.5 MPa | 78.6 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 1.0 MPa (29 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Pick the bore by the thrust your job needs. The 10mm bore delivers a theoretical 78.5 N push at 0.5 MPa (pull is lower because the rods take up piston area). TN is the enterprise-standard line with PT threads only; the TR line adds JIS mounting, a precise guide with two-side ports, and G or NPT thread options. Keep the stroke within the bore's rated table and avoid over-long strokes on short-cover bodies. We can confirm side-load suitability from the datasheet.
Applications
Conveyor Pusher
Mounts at a conveyor side to push pouches or small parts onto a transfer lane; the twin rods keep the pusher face square so parts exit cleanly without skewing.
Pick-and-Place Clamp
Grips a small workpiece and lifts it between stations; the two guide rods hold the clamp jaw in line so the part does not rotate during the transfer move.
Alignment Stopper
Rises between guide rails to halt an incoming blank at a set position; the twin-rod design keeps the stop face vertical so the blank seats squarely for the next operation.
FAQ
What thrust does the 10mm bore TN cylinder provide?
The theoretical push thrust is 78.5 N at 0.5 MPa. Pull thrust is lower because the rods occupy piston area. Operating pressure for the 10mm bore is 0.2-1.0 MPa (29-145 psi).
How does the bumper cushion work on this cylinder?
The bumper is an external front pad that both cushions end-of-stroke impact and adjusts the effective stroke over a -5 to 0 mm range. It is not an air cushion. We confirm exact dimensions and side-load limits from the datasheet on request.