The AirTAC Airtac TR Twin-Rod Cylinders TR6X10S is a genuine TR twin-rod (double-rod) double-acting cylinder, 6 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 28.3 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range. As the JIS guide-grade series it adds high non-rotating precision, a lengthening sliding guide (no added lubricant) and two-side ports.
A twin-rod cylinder uses two parallel rods on one shared plate to resist bending and twisting, so the load moves without rotating. The TR6X10S has a compact 6mm bore and 10mm stroke; at 0.5 MPa it delivers 28.3 N push thrust, and the adjustable bumper cushions impact over a -5 to 0 mm range.
This is a genuine AirTAC part built to JIS standard with the precise guide-grade design: higher non-rotating accuracy, low rod-end deflection, a lengthening sliding-support guide that needs no added lubricant, and two port groups on both sides. A magnet is standard on every model, and we confirm dimensions and sizing from the datasheet on request.
| Model | Airtac TR Twin-Rod Cylinders TR6X10S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TR (JIS standard) |
| Bore | 6 mm |
| Push thrust @0.5 MPa | 28.3 N |
| Port size | M5x0.8 (PT, G or NPT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 1.0 MPa (29 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
The 6mm bore delivers 28.3 N push at 0.5 MPa - the lightest option for small jobs. TN is the enterprise standard with PT thread only, while TR is JIS with PT, G, or NPT threads and the precise guide for tighter anti-rotation. A 10mm stroke is short and safe; for longer strokes, verify against the bore's stroke table. We confirm allowable side-load from the datasheet curves on request.
Stops tiny electronic components on a pick-and-place track; the compact 6mm bore fits in tight housings and the short 10mm stroke snaps a stop pin into the path.
Clamps a small connector during crimping; the twin rods prevent the clamp jaw from rotating so the crimp lands squarely on the terminal.
Pushes a lab sample vial from a rack into a testing cell; the miniature stroke nudges the vial precisely without overshoot, and anti-rotation keeps the pusher tip aligned.
Yes - the magnet is standard on every TR and TN model. The body has magnetic-switch slots for position sensing, so you do not order a separate magnetic option.
The 6mm bore gives 28.3 N push thrust at 0.5 MPa. Operating pressure for bore 6 is 0.2 to 1.0 MPa (29 to 145 psi). We confirm the full thrust curve from the datasheet on request.