Airtac X-EPLM Right Angle Bulkhead Fitting X-EPLM1220X1
AirTAC X-EPLM1220X1 Right-Angle Bulkhead Fitting Specifications
- Model: X-EPLM1220X1
- Type: 90° dual-thread bulkhead union
- Body material: Stainless steel (SUS303)
- Seal material: NBR (Nitrile) with anti-extrusion ring
- Port configuration: G1/8 (internal) × PT1/4 (external)
- Max working pressure: 1.5 MPa (217 psi)
- Proof pressure: 3.0 MPa
- Burst pressure: ≥6.0 MPa
- Temperature range: -20℃ to 80℃ (-4°F to 176°F)
- Surface treatment: Electropolished internal bore
- Weight: 98g ±2g
- Dimensions: 38mm(L) × 32mm(W) × 26mm(H)
- Installation torque: 12-15 N·m (aluminum panels), 18-22 N·m (steel panels)
- Flow coefficient (Cv): 0.65
- Compatibility: Air, inert gases, vacuum systems
High-density machined bulkhead connector with dual sealing surfaces, designed for panel-mounted pneumatic systems requiring space optimization. Features a 3-step thread locking mechanism (primary thread + sealing taper + jam nut) for vibration resistance. Electropolished 4mm internal flow path minimizes turbulence.
- Modular pneumatic control cabinets
- Robotic arm end-effector air routing
- Medical equipment gas line passthrough
- Semiconductor wafer handling vacuum systems
- Mobile hydraulic service panel interfaces
Installation protocol:
Apply thread sealant only on external PT1/4 port. Use backup wrench on hex base during tightening to prevent body rotation. Perform pressure test at 1.8MPa for 10min post-installation. Replace O-rings every 50,000 actuation cycles in high-vibration environments.
| Property | Property Value |
|---|---|
| sku | X-EPLM1220X1 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.