AirTAC 2W050-10 2-Way Solenoid Valve (2W05010FI)
$53.47
Regular price
$60.97
Sale!
Unit price
per
sold in last hours
customers are viewing this product
Couldn't load pickup availability
SKU:
In stock
SKU:
2W05010FI
Product type:
DELIVERY
Estimated delivery between
and
Guarantee Safe Checkout
Description
1. Piston-piloted normally closed 2-way 2-position solenoid valve with rapid response and high flow capacity;
2. Direct-acting normally closed 2-way 2-position solenoid valve featuring fast and precise switching;
3. Compact design with minimized footprint, lightweight construction, and tool-free installation;
4. Brass valve body with B-class thermal-rated coil. Standard FPM/FKM seals ensure compatibility with diverse media. Custom seal materials available upon technical consultation;
5. IP65-rated coil protection, available in lead wire or DIN connector configurations.
Category: Solenoid Valves | Brand: AIRTAC | Series: 2W
Installation protocol:
Apply 25-35 N·m torque during manifold mounting. Use PTFE tape only on male threads,
leaving 1.5 thread turns exposed. For vertical piping, install with coil facing downward
to prevent condensate ingress. Perform 50-cycle dry run before commissioning.
2. Direct-acting normally closed 2-way 2-position solenoid valve featuring fast and precise switching;
3. Compact design with minimized footprint, lightweight construction, and tool-free installation;
4. Brass valve body with B-class thermal-rated coil. Standard FPM/FKM seals ensure compatibility with diverse media. Custom seal materials available upon technical consultation;
5. IP65-rated coil protection, available in lead wire or DIN connector configurations.
Category: Solenoid Valves | Brand: AIRTAC | Series: 2W
AirTAC 2W05010FI Solenoid Valve Technical Details
- Model: 2W05010FI
- Type: 2-position, 2-way direct acting (monostable)
- Port configuration: G1/8 (ISO228/1 standard)
- Threaded connection: M5x0.8 (optional adapters available)
- Operating pressure range: 0.15–1.0 MPa (21.7–145 PSI)
- Max working pressure: 1.5 MPa (217.5 PSI burst-proof design)
- Voltage variants: DC12V (±10%), DC24V (±10%), AC110V (50/60Hz), AC220V (50/60Hz)
- Power consumption: 1.6W (DC), 2.2VA (AC)
- Response time: ≤15ms (energize), ≤20ms (de-energize)
- Flow coefficient (Cv): 0.65
- Seal material: FKM (Viton® equivalent) for high chemical resistance
- Body material: Reinforced PBT with UL94 V-0 flame rating
- Ambient temperature: -5℃ to 60℃ (with 95% RH max non-condensing)
- Medium temperature: 0℃ to 60℃ (dry air or inert gases)
- Protection class: IP67 (dust-tight and temporary immersion protected)
- Weight: 180g ±5g (without connector)
- Dimensions: 52mm(L) × 35mm(W) × 38mm(H) (excluding electrical connector)
- Port orientation: Axial flow path with bi-directional arrow markings
- Mounting position: Any (360° rotatable manifold interface)
High-speed 2/2-way valve optimized for precision gas control in compact systems. Features dual-chamber design for reduced pressure loss and surge protection. Certified for ISO 8573-1:2010 [2:4:2] air quality standards. Includes manual override button for system debugging.
Industrial Applications:
- Pneumatic cylinder sequencing in SMT assembly lines
- Breathalyzer calibration gas control systems
- Lithium battery dry room atmosphere regulation
- Semiconductor wafer handling robotics
- Ozone generator timing controls
- 3D printer nozzle purge mechanisms
Installation protocol:
Apply 25-35 N·m torque during manifold mounting. Use PTFE tape only on male threads,
leaving 1.5 thread turns exposed. For vertical piping, install with coil facing downward
to prevent condensate ingress. Perform 50-cycle dry run before commissioning.
Lifetime: 10 million cycles minimum (tested @ 0.5Hz with 0.5MPa load)
Lubrication: Pre-lubricated (do NOT apply additional oils/greases)
Lubrication: Pre-lubricated (do NOT apply additional oils/greases)
| Property | Property Value |
|---|---|
| sku | 2W05010FI |
| Port Size | PT3/8 |
| Flow Aperture | <5mm> |
| Coil Voltage | DC12V |
Shipping policies
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.
Reviews
Recently Viewed
Explore your recently viewed items, blending quality and style for a refined living experience.