Airtac 2KWH Fluid Solenoid Valve 2KWH05010F
2. Extensive pressure range adaptability with model options: Ultra-high pressure (X), High pressure (H), Standard, and Large flow capacity (L);
3. Compact design with minimized footprint, lightweight construction, and tool-free installation for enhanced maintenance efficiency;
4. Brass valve body with Class B thermal-rated coil. Standard FPMF (Fluoroelastomer) seals ensure compatibility across diverse media. Customizable seal materials available upon technical consultation;
5. IP65-rated coil protection and multiple wiring configurations: direct lead wire or DIN connector.
Category: Fluid Solenoid Valves | Brand: AirTAC | Series: 2KWH
AirTAC 2KWH05010F Fluid Solenoid Valve Specifications
- Model: 2KWH05010F
- Type: 2-position, 5-port direct-acting solenoid valve
- Port configuration: 5/2-way (double solenoid)
- Port size: G1/8 (ISO228 standard)
- Thread type: BSPP (parallel)
- Operating pressure: 0.1–1.0 MPa
- Proof pressure: 1.5 MPa
- Voltage options: DC24V (±10%), AC110V (50/60Hz), AC220V (50/60Hz)
- Coil insulation class: Class F (155°C)
- Power consumption: 2.2W (DC), 3.5VA (AC)
- Response time: ≤15ms (energize), ≤20ms (de-energize)
- Flow coefficient (Cv): 1.2
- Seal material: Fluorocarbon rubber (FKM) for high chemical resistance
- Body material: Anodized aluminum alloy
- Temperature range: -10℃ to 80℃ (with 0-85% RH non-freezing)
- Protection rating: IP67 (dust tight and protected against immersion)
- Electrical connection: DIN43650 Form A connector
- Weight: 280g ±5g
- Dimensions: 58mm(L) × 35mm(W) × 52mm(H) (excluding fittings)
- Endurance: ≥10 million cycles (at 1Hz frequency)
High-flow 5/2-way valve with dual solenoid operation, engineered for aggressive fluid control applications. Features rapid response time and FKM seals compatible with compressed air, inert gases, and non-corrosive liquids. The hardened aluminum body withstands vibration in mobile hydraulic systems.
- Automated liquid dispensing systems
- Chemical injection equipment
- Coolant control in CNC machining centers
- Pneumatic actuator sequencing in packaging lines
- Vacuum pump control systems
Installation guidelines:
Mount with 15mm minimum clearance for heat dissipation. Use 5μm filtration upstream.
For liquid media, install vertically with coil facing upward. Lubricate only with ISO VG32
turbine oil if required. Cycle test after installation to verify stroke consistency.
| Property | Property Value |
|---|---|
| sku | 2KWH05010F |
| Port Size | PT3/8 |
| Flow Aperture | <4mm> |
| Coil Voltage | DC12V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.