Airtac 2L Solenoid Valve 2L20020A
2. Pilot-operated piston type normally closed 2-port 2-way solenoid valve featuring fast actuation and high flow capacity;
3. Extended pressure range compatibility, available in high-pressure (H) and standard configurations;
4. Compact, lightweight design with space-saving dimensions for easy installation and maintenance;
5. SUS304 stainless steel body construction, Class H thermal-rated coil, and PTFE (Teflon) seals ensuring compatibility with diverse media including high-temperature water and saturated steam;
6. IP65-rated coil protection with wiring options: direct lead wire or DIN connector interface.
Category: Solenoid Valves | Brand: AIRTC | Series: 2L
AirTAC 2L20020A Solenoid Valve Technical Details
- Model: 2L20020A
- Type: 5/2-way single solenoid (monostable)
- Port size: PT1/4 (G1/4 optional)
- Operating pressure: 0.15–0.8 MPa (21.7–116 PSI)
- Flow coefficient (Cv): 1.2
- Voltage options: DC12V (±10%), DC24V (±10%), AC110V (50/60Hz), AC220V (50/60Hz)
- Power consumption: DC: 3.5W | AC: 4.5VA
- Response time: ≤15ms (excitation), ≤20ms (reset)
- Seal material: HNBR (Hydrogenated Nitrile) for high temp resistance
- Valve body material: Reinforced PBT with UL94 V-0 rating
- Temperature range: -5℃ to 80℃ (with intermittent 100℃ peak)
- Protection rating: IP67 (dustproof & temporary immersion)
- Weight: 320g ±5g
- Dimensions: 76mm(L) × 32mm(W) × 50mm(H)
- Port thread depth: 12mm (minimum engagement)
- Manual override: Optional paddle actuator
High-flow directional control valve featuring shock-resistant construction and zero pressure differential operation capability. The optimized spool design achieves ≤0.5ms switching consistency under 0.5MPa. Electromagnetic shielding reduces coil temperature rise by 15% compared to standard models. Compatible with ISO 15407-1 standards.
- Pneumatic cylinder sequencing in automated assembly lines
- Clamping/unclamping mechanisms in CNC machining centers
- Material handling systems with rapid cycling requirements
- Plastic injection molding machine ejectors
- Test bench pressure regulation setups
Installation protocol:
Maintain ≥15mm clearance from high-frequency drives. Use ISO 8573-1 Class 3
compressed air (max 5mg/m³ oil content). For horizontal mounting, install
exhaust silencers at 15° downward angle to prevent condensate ingress.
- Mechanical: 50 million cycles (under clean air conditions)
- Electrical: 100,000 cycles (rated load)
- Lubrication: Not required (maintenance-free design)
| Property | Property Value |
|---|---|
| sku | 2L20020A |
| Port Size | BSPT 3/4 |
| Flow Aperture | <20mm> |
| Coil Voltage | AC220V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.