Airtac 2WX Fluid Solenoid Valve 2WX03006FI
2. Wide pressure range adaptability with selectable variants: Ultra-high pressure (X), High pressure (H), Standard, High flow (L), and Extra-high flow (T);
3. Compact design with minimal footprint, lightweight construction, and simplified installation/maintenance;
4. Brass valve body with B-class thermal-rated coils. Standard FPMF (Fluorine Rubber) seals ensure multi-media compatibility. Custom seal materials available upon request – consult our technical department;
5. IP65-rated coil protection. Electrical connection options: Direct lead wire or DIN connector.
Category: Fluid Solenoid Valves | Brand: Airtac | Series: 2WX
AirTAC 2WX03006FI Fluid Solenoid Valve Specifications
- Model: 2WX03006FI
- Type: 2-position 3-way (2WX) direct-acting solenoid valve
- Port size: G1/8 (ISO228 standard)
- Effective section area: 6mm orifice
- Operating pressure: 0.1–1.0 MPa (14.5–145 PSI)
- Voltage variants: DC12V (±10%), DC24V (±10%), AC110V (50/60Hz), AC220V (50/60Hz)
- Power consumption: DC: 2.5W / AC: 3.5VA
- Weight: 290g ±5% (without connector)
- Dimensions: 54mm(L) × 44mm(W) × 60mm(H) (including fittings)
- Seal material: Fluorinated rubber (FKM) standard (NBR optional)
- Fluid temperature range: -5℃ to 80℃ (non-freezing conditions)
- Response time: ≤15ms (at rated voltage)
- Flow capacity: Cv=0.8 (Kv=0.92)
- Protection class: IP65 (coil assembly)
- Port thread depth: 12mm (full thread engagement recommended)
- Compliance: RoHS 2.0, REACH SVHC
High-flow micro solenoid valve with precision-machined brass body, designed for aggressive media control in harsh environments. Features low-hysteresis plunger mechanism and shock-resistant coil design. Requires 25μm filtration for optimal performance. Compatible with compressed air, water, and light hydraulic oils (ISO VG32 or lower).
- Coolant flow control in CNC machining centers
- Reverse osmosis system backwash cycles
- Lubrication oil distribution in automated assembly lines
- Medical gas mixing stations (oxygen/nitrogen)
- Beverage dispenser liquid routing systems
Installation protocol:
Mount with inlet port (P) oriented downward. Allow ≥15mm clearance below manifold surface for heat dissipation.
Always perform 5-cycle manual override test before system pressurization.
| Property | Property Value |
|---|---|
| sku | 2WX03006FI |
| Port Size | PT1/8 |
| Flow Aperture | 1.5mm |
| Coil Voltage | DC12V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.