Airtac AirTAC 2KW Fluid Control Valve 2KW05015E
1. Direct-acting normally open 2/2-way solenoid valve with rapid response and high sensitivity;
2. Wide pressure range compatibility: Available in Ultra-high Pressure (X), High Pressure (H), Standard, and Large Flow (L) configurations;
3. Versatile pilot-operated normally open 2/2-way solenoid valve featuring fast switching and high flow capacity;
4. Compact structure with space-saving design, lightweight construction, and tool-free maintenance;
5. Brass valve body with Class B thermal-rated coil. Standard FKM (Fluoroelastomer) seals ensure compatibility with multiple media. Custom seal materials available through technical consultation;
6. IP65-rated coil protection, available in direct lead-wire or DIN connector configurations.
Category: Fluid Solenoid Valves | Brand: AirTAC | Series: 2KW
AirTAC 2KW05015E Fluid Control Valve Technical Details
- Model: 2KW05015E
- Type: 5/2-way solenoid valve (double solenoid)
- Port size: 1/4" NPT (G1/8 optional)
- Operating pressure: 0.15–0.8 MPa (21.7–116 PSI)
- Voltage: 24V DC ±10% (110V/220V AC variants available)
- Flow capacity: Cv 0.25 (at 7 bar)
- Response time: ≤15ms (actuation/deactivation)
- Weight: 320g ±5% (including coil)
- Dimensions: 52mm(L) × 38mm(W) × 68mm(H)
- Body material: Anodized aluminum alloy
- Seal material: Heat-resistant NBR (-5℃ to 80℃)
- Ambient temperature: -5℃ to 60℃ (non-freezing)
- Protection rating: IP67 (dust/water resistant)
- Power consumption: 1.6W (steady state)
- Port thread depth: 9mm (minimum engagement)
High-flow directional control valve with dual solenoid operation, featuring a reinforced armature system for 2 million+ cycle durability. The T-slot mounting design enables tool-free manifold stacking. Optimized flow paths reduce pressure drop by 18% compared to previous generation models.
- Pneumatic cylinder sequencing in automotive assembly lines
- Textile machinery shuttle control systems
- Bottle cap sorting & capping automation
- Semiconductor wafer handling robotics
- Plastic injection molding ejector systems
Installation protocol:
Use M5x0.8 mounting screws with 0.4-0.6Nm torque. Maintain 15mm clearance
below valve for service access. Lubricate seals with ISO VG32 turbine oil
during maintenance. Requires 5μm filtration upstream.
| Property | Property Value |
|---|---|
| sku | 2KW05015E |
| Port Size | PT 1/2 |
| Flow Aperture | <5mm> |
| Coil Voltage | AC24V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.