This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID50X100, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID50X100
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID50X100 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø50mm bore and 100mm stroke, G1/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID50X100, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ50 mm
- Stroke100 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → B06-SAID50X100
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID50X100
The AirTAC B06-SID50X100 is a discontinued double-acting double-rod ISO 15552 cylinder where the B06- prefix marks it as a battery-manufacturing dedicated variant, mechanically identical to the standard SID50X100. A rod exits both ends on one piston, meaning both faces use the rod-side area and push/pull force is equal at 825 N @0.5 MPa. It features a 50 mm bore, G1/4 port, M16x1.5 rod thread, and 30 mm adjustable cushions. The direct replacement is the SAID50X100, which reuses the same ISO 15552 mounting interface, bore, and stroke. The SAI upgrade uses a two Y-shaped one-way piston seal for low start-up pressure and long life.
Because the second rod drives a sensor cam or a second tool while resisting rotation, double-rod architecture provides superior anti-rotation compared to single-rod units. Note this SKU lacks the -S magnet and cannot take a magnetic switch. A plain cylinder does not hold loads on air loss; the cushion only decelerates near stroke end, so use an external rod lock or pilot-operated check valve for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID50X100 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID50X100 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID50X100 |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID50X100 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
The B06-SAID50X100 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID50X100
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID50X100 Is Used
Battery Cell Stacking
Equal push and pull force precisely indexes prismatic battery cells during stacking, while the second rod resists rotational drift to maintain alignment.
Module Tab Welding
The rear rod extension drives a sensor cam or secondary clamp, synchronizing tab welding pressure in both advance and retract motions.
Pack Handling Transfer
Drives dual-tool grippers to transfer battery packs between conveyors, leveraging equal both-ways force to maintain grip without momentum shifts.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID50X100 with the B06-SAID50X100
To replace the discontinued B06-SID50X100, specify the direct replacement SAID50X100, which matches the 50 mm bore, 100 mm stroke, G1/4 port, and ISO 15552 mounting footprint (Basic, FA, LB, TC). Size both directions by verifying the equal force meets your requirement (825 N @0.5 MPa); if higher force is needed, step up to the 63 mm bore, or drop to 40 mm if lower force suffices. Choose a double-rod cylinder when you need anti-rotation, a back rod to carry a sensor cam, or to drive two tools simultaneously. This non-magnetic SKU cannot support sensors; add the -S suffix on the SAID if you need legacy CS1-B/DS1-B switch accuracy. For strokes >=300 mm, verify the side-load limits to prevent excessive guide wear. Operating speed is 30-800 mm/s.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID50X100
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID50X100 FAQ
Yes, the B06-SID50X100 (battery-manufacturing dedicated variant of SID50X100) is discontinued. The direct replacement is the SAID50X100, which shares the identical ISO 15552 interface, 50 mm bore, 100 mm stroke, G1/4 port, and mounting. The SAI family also adds SAIL (air-released lock) and BSAI (clamp-lock) variants the SI line lacked.
Force is equal both ways at 825 N @0.5 MPa, 1154 N @0.7 MPa, and 1484 N @0.9 MPa. Operating pressure is 0.15-1.0 MPa (proof 1.5 MPa), temp -20 to +70 C, and speed ranges 30-800 mm/s. It uses a G1/4 port and 30 mm adjustable cushions.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID50X100
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID50X100 replacement — usually within 7-8 hours.