Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID50X1000
AirTAC B06-SID50X1000 Battery-Optimized ISO Cylinder Specifications
- Full model: B06-SID50X1000
- Standard: ISO 6432 compliant
- Bore size: Ø50 mm
- Stroke length: 1000 mm
- Operating pressure: 0.1–0.9 MPa
- Cushioning: Adjustable pneumatic cushion (both ends)
- Temperature range: -20℃ to 80℃
- Piston speed: 50–800 mm/s (lubricated)
- Material:
- Tube: Aluminum alloy (hard anodized)
- Piston rod: Stainless steel (SUS304)
- Seals: NBR + Special wear-resistant compound
- Weight: 8.7 kg (complete assembly)
- Dimensions:
- Body diameter: Ø63 mm
- Retracted length: 1130 mm
- Extended length: 2130 mm
- Mounting base: 95mm × 45mm (M6 mounting holes)
- Air consumption: 2.45 L/cycle (@0.6MPa)
- Protection class: IP67 (standard wiper design)
- Rod end thread: M16×1.5 (male)
Specialized long-stroke cylinder engineered for battery-powered automation systems, featuring 30% reduced friction resistance compared to standard models. The triple-lip wiper design ensures particulate containment in clean energy applications. Requires minimal lubrication due to self-retaining grease reservoir in piston design.
- Lithium battery module assembly lines
- Solar panel positioning mechanisms
- EV battery pack handling systems
- Portable medical device actuators
- Off-grid energy storage maintenance robots
Installation note:
Horizontal mounting recommended for strokes >500mm. Use support brackets every 600mm
for 1000mm stroke applications. Requires 5μm filtered air with dew point -20℃ below ambient.
- Compatible with 24V DC power systems
- Low-power solenoid valve interface (≤1.2W holding power)
- Optional position feedback: Magnetic sensor slot (M8 connector)
| Property | Property Value |
|---|---|
| sku | B06-SID50X1000 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.