This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID50X200S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID50X200S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID50X200S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø50mm bore and 200mm stroke, G1/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID50X200S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ50 mm
- Stroke200 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → B06-SAID50X200S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID50X200S
The AirTAC B06-SID50X200S is a double-acting, double-rod ISO 15552 cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant, mechanically identical to the standard SID50X200S. A rod exits both ends on a single piston, meaning both faces use the rod-side area and push/pull force is equal both ways (825 N at 0.5 MPa). It features a 50mm bore, G1/4 air port, M16x1.5 rod thread, and 30mm adjustable cushions at each end. This SID model is discontinued and the direct replacement is the SAID50X200S, which retains the same ISO 15552 mounting interface, bore, stroke, and force.
The SAI replacement family introduces an upgraded piston seal using two Y-shaped one-way elements for low start-up pressure and long life, alongside new SAIL and BSAI lock variants absent in the SI line. The -S suffix indicates a built-in piston magnet for legacy CS1-B/DS1-B switches. Note that a plain cylinder cannot hold a load on air loss; the cushion only decelerates near stroke end, so an external rod lock is required for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID50X200S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID50X200S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID50X200S |
| Bore size | Ø50 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID50X200S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
The B06-SAID50X200S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID50X200S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID50X200S Is Used
Cell Stacking Assembly
Applies equal both ways force for precise alignment and pressing during prismatic cell stacking operations in battery module production lines.
Module Handling Transfer
Uses the dual-rod anti-rotation feature to push and retract battery modules on a conveyor without drift, ensuring accurate positioning for tab welding.
Pack Lift and Shift
Drives two simultaneous tooling actions from one cylinder to lift and shift heavy battery packs, maintaining stability under dynamic loads.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID50X200S with the B06-SAID50X200S
To replace the discontinued B06-SID50X200S, select the SAID50X200S, which provides a direct solution matching the ISO 15552 mounting interface, 50mm bore, 200mm stroke, G1/4 port, and equal both ways force. If less force is needed, the neighbouring 40mm bore offers 528 N, while the 63mm bore provides 1402 N for heavier demands. A double rod is the right choice when you need anti-rotation stability, the ability to drive two tools from one cylinder, or when the back rod must carry a sensor cam. Mounting options include Basic, FA, LB, and TC styles. The -S magnet supports legacy CS1-B/DS1-B sensors. For this 200mm stroke, side-load alignment is not critical, but for any stroke >=300mm, carefully manage side-load line constraints to prevent guide wear.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID50X200S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID50X200S FAQ
Yes, the B06-SID50X200S is discontinued. The direct replacement is the SAID50X200S. The B06- prefix simply marks it as a battery-manufacturing dedicated variant, so mechanically it is identical to the SID50X200S. The SAID50X200S matches the ISO 15552 mounting interface, 50mm bore, 200mm stroke, G1/4 port, and force ratings perfectly.
Because it is a double-rod cylinder, force is equal both ways: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and 1484 N at 0.9 MPa. The bore is 50mm with a G1/4 air port and M16x1.5 rod thread. It operates at 0.15-1.0 MPa with a speed of 30-800 mm/s. A plain cylinder does not hold loads on air loss; the cushion only decelerates, so use an external rod lock for held loads.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID50X200S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID50X200S replacement — usually within 7-8 hours.