This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAID63X700 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAID63X700 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X700
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X700 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø63mm bore and 700mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAID63X700, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ63 mm
- Stroke700 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → B06-SAID63X700
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X700
The AirTAC B06-SID63X700 is a double-acting, double-rod ISO 15552 cylinder where a rod exits both ends, making push and pull force equal at 1402 N @0.5 MPa, 1962 N @0.7 MPa, and 2523 N @0.9 MPa. The B06- prefix marks this as a battery-manufacturing dedicated variant of the base SID63X700, mechanically identical with a 63mm bore, 700mm stroke, G3/8 port, and M16x1.5 rod thread. This SID model is discontinued; the drop-in replacement is the SAID63X700, which reuses the exact ISO 15552 mounting interface and adds an upgraded two-piece Y-shaped piston seal for lower start-up pressure and longer life.
Because both faces use the rod-side area, force is equal both ways, yielding a safe working load of roughly 841 N (60% of the 0.5 MPa rating) and a vertical lift capacity of about 71 kg with a 2:1 margin. The back rod can drive a second tool or carry a sensor cam, though this specific no-magnet SKU cannot accept a magnetic switch. Note that air cushions only decelerate the piston near stroke end; for load holding on air loss, an external rod lock or pilot-operated check valve is required.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X700 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X700 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID63X700 |
| Bore size | Ø63 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID63X700 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
The B06-SAID63X700 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X700
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X700 Is Used
Battery Cell Stacking
Equal both-ways force ensures precise, balanced pressure during battery cell stacking and alignment operations.
Module Transfer
Double-rod anti-rotation stability moves battery modules between assembly stations without drift or twist.
Tab Welding Clamp
The rear rod can drive a secondary mechanism while the front rod clamps battery tabs for welding.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X700 with the B06-SAID63X700
To replace the discontinued B06-SID63X700, specify the SAID63X700, which matches the 63mm bore, 700mm stroke, G3/8 port, and ISO 15552 mounting footprint (Basic, FA, LB, TC). Size both directions by the equal-both-ways force: 1402 N @0.5 MPa, 1962 N @0.7 MPa, or 2523 N @0.9 MPa. If neighboring bores are considered, the 50mm yields 825 N and the 80mm yields 2268 N at 0.5 MPa. A double rod is right when you need anti-rotation, equal push/pull, or a back rod for a sensor cam. For the 700mm stroke, use external guides to prevent rod bending and side loads. This non-magnetic model cannot take switches; for sensing, choose an -S variant.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID63X700
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID63X700 FAQ
Yes, the B06-SID63X700 is discontinued. The exact drop-in replacement is the SAID63X700. The B06- prefix only designates it as a battery-manufacturing dedicated variant; mechanically, it is identical to the standard SID63X700. The SAID63X700 matches the ISO 15552 interface, 700mm stroke, G3/8 port, and force, while adding an upgraded piston seal.
It features a G3/8 air port and M16x1.5 rod thread. Because it is a double-rod cylinder, force is equal both ways: 1402 N @0.5 MPa, 1962 N @0.7 MPa, and 2523 N @0.9 MPa. The safe working load is ~841 N. Air cushions only decelerate; use an external rod lock for load holding.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID63X700
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID63X700 replacement — usually within 7-8 hours.