This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAID80X200 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAID80X200 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X200
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X200 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 200mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAID80X200, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke200 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID80X200
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X200
The AirTAC B06-SID80X200 is a double-acting, double-rod ISO 15552 cylinder where a rod exits both ends, making push and pull force equal at 2268 N @0.5 MPa. The B06- prefix marks this as a battery-manufacturing dedicated variant of the base SID80X200, mechanically identical with an M20x1.5 rod thread and G3/8 port. As the SID line is discontinued, the exact drop-in replacement is the SAID80X200, retaining the same mounting interface and bore.
The SAID upgrade introduces a two Y-shaped one-way piston seal for lower start-up pressure and longer life. Because the second rod drives a sensor cam or a second tool while resisting rotation, the equal-both-ways force yields a safe working load of roughly 1361 N and a vertical lift capacity of about 116 kg with a 2:1 margin. Note this non-magnetic SKU cannot take a switch, and air cushions only decelerate; use an external rod lock for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X200 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X200 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID80X200 |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID80X200 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The B06-SAID80X200 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X200
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X200 Is Used
Battery Cell Stacking
Applies equal both-ways force to align and press battery cells during module stacking, using the twin rods to prevent platform rotation.
Tab Welding Clamp
Drives dual welding heads simultaneously from one piston, maintaining parallelism across battery tabs with 2268 N of force at 0.5 MPa.
Pack Handling Transfer
Shifts battery packs between conveyors using the extended rear rod to mount a cam, keeping the payload balanced without load bias.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X200 with the B06-SAID80X200
To replace the discontinued B06-SID80X200, specify SAID80X200 to retain the identical ISO 15552 mounting and G3/8 port. Size both directions by the equal force: 2268 N at 0.5 MPa, or step down to a 63 mm bore (1402 N) and up to a 100 mm bore (3681 N) if margins require. Choose a double-rod design when anti-rotation or driving two tools is needed. Mount via FA, LB, or TC brackets. As this is a non-magnetic SKU, it cannot accept switches. For strokes of 300 mm or longer, verify side-load limits to prevent guide wear.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID80X200
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X200 FAQ
Yes, the SID line is discontinued. The B06- prefix simply denotes the battery-manufacturing dedicated variant of the base SID80X200. The exact drop-in replacement is the SAID80X200, which shares the identical ISO 15552 interface, 80 mm bore, 200 mm stroke, G3/8 port, and force ratings.
Because it is a double-rod cylinder, force is equal both ways: 2268 N @0.5 MPa, 3175 N @0.7 MPa, and 4082 N @0.9 MPa. The air port is G3/8. This yields a safe working load of ~1361 N and a vertical lift capacity of ~116 kg with a 2:1 margin. Note this non-magnetic SKU cannot accept switches.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID80X200
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID80X200 replacement — usually within 7-8 hours.