This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID80X700, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X700
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X700 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 700mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID80X700, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke700 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID80X700
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X700
The AirTAC B06-SID80X700 is a double-acting double-rod ISO 15552 cylinder where the B06- prefix marks it as a battery-manufacturing dedicated variant of the base SID80X700, mechanically identical in every spec. A rod exits both ends on one piston, meaning both faces use the rod-side area and push/pull force is equal both ways (2268 N @0.5 MPa). This model is discontinued and the direct replacement is the SAID80X700, which retains the 80mm bore, 700mm stroke, G3/8 port, and M20x1.5 rod thread.
Because the SAID80X700 shares the genuine ISO 15552 mounting interface, existing FA, LB, and TC brackets can be reused without machining. The SAI replacement also introduces an upgraded piston seal using two Y-shaped one-way elements for lower start-up pressure and longer life. Note this SKU lacks the -S magnet and cannot accept a sensor.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X700 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X700 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID80X700 |
| Bore size | Ø80 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID80X700 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The B06-SAID80X700 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X700
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X700 Is Used
Battery Cell Stacking
Equal both-ways force drives precise cell stacking and tabbing operations in module assembly without the rotational drift common to single-rod units.
Dual-Tool Pack Handling
The extended back rod simultaneously carries a sensor cam or secondary actuator, ideal for synchronizing conveyor transfers in battery pack lines.
Guided Clamping Press
Double-rod geometry provides inherent anti-rotation for clamping battery housings, maintaining alignment over the 700mm stroke.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X700 with the B06-SAID80X700
To replace the discontinued B06-SID80X700, install the direct replacement SAID80X700, matching the 80mm bore, 700mm stroke, and G3/8 port. Force is equal both ways at 2268 N @0.5 MPa; if you need more lift, step up to the 100mm bore, or drop to 63mm for lower force. Choose a double-rod cylinder when you need anti-rotation stability or must drive two tools from one piston. Reuse your existing FA, LB, or TC mounts. This SKU has no -S magnet, so sensing is impossible. At 700mm stroke, use external guides to prevent rod bending under side loads. For load holding, note the air cushion only decelerates; use an external rod lock or SAIL/BSAI variant for held loads.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID80X700
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X700 FAQ
Yes, the B06-SID80X700 is discontinued. The direct replacement is the SAID80X700. The B06- prefix simply marks it as the battery-manufacturing dedicated variant of the base SID80X700, so mechanically it is identical. The SAID80X700 keeps the same ISO 15552 mounting, 80mm bore, 700mm stroke, and G3/8 port.
Because it is a double-rod cylinder, force is equal both ways: 2268 N @0.5 MPa, 3175 N @0.7 MPa, and 4082 N @0.9 MPa. The air port is G3/8.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID80X700
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID80X700 replacement — usually within 7-8 hours.