Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X700
The AirTAC B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X700 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 700mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke700 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X700
The AirTAC B06-SAID80X700 is a double-acting, double-rod ISO 15552 profile cylinder. The B06- prefix marks this as AirTAC's battery-manufacturing dedicated variant of the SAID80X700, meaning it is mechanically identical to the standard model but designated for cell, module, and pack assembly lines. Because a rod exits both ends, the annulus area is identical on extend and retract, yielding exactly 2268 N of force each way at 0.5 MPa.
This through-rod geometry allows you to mount a workpiece on the front rod end and a position flag or cam on the rear. The extruded aluminum barrel features sensor grooves on both sides, and the carbon steel rod is paired with adjustable air cushions at both ends to decelerate the 700 mm travel. Note that the rear rod requires extra clearance in your machine frame.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X700 Technical Specifications
| Model | Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X700 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X700
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X700 Is Used
Battery Cell Stacking
Drives symmetric stacking presses where the rear rod simultaneously triggers a DMSE solid-state sensor for precise electrode positioning.
Twin-Station Transfer
Actuates two synchronized pincer tools from a single piston, utilizing the equal extend and retract force to move battery modules smoothly.
Anti-Rotation Guiding
Pivots heavy pack handling arms where the double-rod construction resists torsional twist better than a single-rod cylinder.
Is the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X700 the Right Cylinder?
Select this 80 mm bore when a battery-handling mechanism requires symmetric force (2268 N both directions at 0.5 MPa) and anti-rotation guidance that a single-rod SAI cannot provide. If your application needs less force, stepping down to the 63 mm bore yields 1402 N both ways; if you need more, the 100 mm bore provides 3681 N. For this 700 mm stroke, the long unsupported carbon steel rod is susceptible to bending under side loads, so an external guide rail is strongly recommended.
As a dimensionally interchangeable ISO 15552 cylinder, it drops in seamlessly with other ISO 15552 double-rod units. It uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and PT threaded ports. Remember that a plain SAID does not hold position if air pressure is lost; for vertical battery-stack holding without live pressure, consider a BSAID clamp-lock or external rod lock. This SKU ships without a magnet; add an -S suffix for CMSE reed or DMSE electronic sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X700 FAQ
Because the double-rod design subtracts the rod area on both sides, the push and pull forces are equal. It generates 2268 N both ways at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa.
The B06- prefix indicates this is AirTAC's battery-manufacturing dedicated variant of the SAID80X700. It is mechanically identical to the standard double-rod ISO 15552 cylinder, with no changes to bore, stroke, or physical specs.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X700
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.