This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAID80X75 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAID80X75 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X75
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X75 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 75mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAID80X75, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke75 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID80X75
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X75
The AirTAC B06-SID80X75 is a double-acting, double-rod ISO 15552 cylinder where the rod exits both ends, making push and pull force equal at 2268 N @0.5 MPa, 3175 N @0.7 MPa, and 4082 N @0.9 MPa. The B06- prefix marks this as a battery-manufacturing dedicated variant, mechanically identical to the base SID80X75 with its 80mm bore, 25mm rod, M20x1.5 thread, and G3/8 port. This SID model is discontinued; the exact drop-in replacement is the SAID80X75, which reuses the same ISO 15552 mounting interface and adds an upgraded two Y-shaped one-way piston seal for lower start-up pressure.
Because both faces use the rod-side area, the equal-both-ways force prevents rod drift asymmetry in vertical battery stacking jigs. This SKU has no -S magnet and cannot take a sensor. Based on the 2268 N @0.5 MPa figure, the safe working load is roughly 1361 N, translating to a vertical lift capacity of about 116 kg with a 2:1 margin. A plain cylinder does not hold loads on air loss; the 36mm adjustable cushions only decelerate near stroke end, so use an external rod lock for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X75 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X75 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID80X75 |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID80X75 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The B06-SAID80X75 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X75
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X75 Is Used
Battery Cell Stacking
Applies equal both-ways 3175 N @0.7 MPa force to press and retract battery cells during module stacking, preventing asymmetric drift on the vertical axis.
Dual-Tool Tabbing Transfer
Uses the dual extending rods to drive two identical welding or tabbing heads in opposing battery pack assembly lines simultaneously without force mismatch.
Pack Handling Pusher
Pushes battery packs between conveyor belts with anti-rotation stability, ensuring the 25mm rod remains perfectly aligned during rapid 30-800 mm/s indexing.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X75 with the B06-SAID80X75
To replace the discontinued B06-SID80X75, specify the SAID80X75 directly—it is a drop-in swap retaining the 80mm bore, 75mm stroke, G3/8 port, and ISO 15552 mounting dimensions (Basic, FA, LB, TC). Size both ways by confirming the 2268 N @0.5 MPa equal force is sufficient, or step to the 100mm bore if more push/pull is needed. Choose a double-rod cylinder when you need anti-rotation stability or equal force to drive two battery cell handling tools simultaneously. This non-magnetic SKU cannot support sensors; select an -S model if switch tracking is required. For this 75mm stroke, side-load alignment is minimal, but always keep guide rails parallel to prevent binding.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID80X75
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X75 FAQ
Yes, the B06-SID80X75 (battery-manufacturing dedicated variant of SID80X75) is discontinued. The exact drop-in replacement is the SAID80X75. It shares the identical 80mm bore, 75mm stroke, G3/8 port, and ISO 15552 mounting interface, while adding an upgraded piston seal. The B06- prefix only denotes the battery industry application and changes no physical specs.
As a double-rod cylinder, force is equal both ways: 2268 N @0.5 MPa, 3175 N @0.7 MPa, and 4082 N @0.9 MPa. The air port is G3/8, the rod is 25mm with an M20x1.5 thread, and it features 36mm adjustable cushions. The safe working load is ~1361 N (60% of the 0.5 MPa force), allowing a 116 kg vertical lift with a 2:1 margin. It operates at 0.15-1.0 MPa and 30-800 mm/s.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID80X75
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID80X75 replacement — usually within 7-8 hours.