This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAID80X800 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAID80X800 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X800
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X800 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 800mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAID80X800, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke800 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID80X800
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X800
The AirTAC B06-SID80X800 is a discontinued double-rod ISO 15552 cylinder where the B06- prefix designates it as a battery-manufacturing dedicated variant of the base SID80X800. Mechanically identical to the base model, it features a rod exiting both ends on one piston, ensuring push and pull force are equal at 2268 N @0.5 MPa, 3175 N @0.7 MPa, and 4082 N @0.9 MPa. It uses a G3/8 air port, a 25 mm rod with M20x1.5 thread, and 36 mm adjustable cushions at each end. The exact drop-in replacement is the SAID80X800, which reuses the same ISO 15552 mounting interface, bore, stroke, and port.
Because the rod-side area is used on both faces, force is equal both ways, preventing single-rod push imbalance. The SAI replacement upgrades the piston seal to two Y-shaped one-way elements for lower start-up pressure and longer life. For sizing, the safe working load is roughly 1361 N (about 60% of the 2268 N @0.5 MPa figure), yielding a vertical lift capacity of approximately 116 kg with a 2:1 margin. Note this SKU lacks a -S magnet and cannot accept a sensor; legacy sensing requires confirm from datasheet.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X800 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X800 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID80X800 |
| Bore size | Ø80 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID80X800 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The B06-SAID80X800 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X800
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X800 Is Used
Cell Stacking Assembly
Equal both ways force drives precision cell stacking and electrode handling in battery module production without push-pull imbalance.
Dual-Tool Tab Welding
The rear rod extension can carry a sensor cam or drive a secondary tab welding fixture, doubling actuation output in pack lines.
Pack Conveyor Transfer
Anti-rotation properties from the double-rod design ensure stable battery pack transfer across conveyor belts during 800 mm strokes.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X800 with the B06-SAID80X800
To replace the discontinued B06-SID80X800, use the SAID80X800 directly—it matches the ISO 15552 interface, 800 mm stroke, G3/8 port, and 25 mm rod. Size both ways by checking neighbor bores (63 mm or 100 mm) while confirming the equal both ways force fits your battery line assembly requirement. A double rod is right when you need anti-rotation stability or need to drive two tools simultaneously. Reuse FA, LB, or TC mounts without alteration. Because this SKU has no -S magnet, it cannot take a switch. For the 800 mm stroke, add an external guide to prevent rod bending under side-load. Do not use for load holding without live air; use an external rod lock or SAIL/BSAI variant instead.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID80X800
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X800 FAQ
Yes, the B06-SID80X800 (a battery-manufacturing dedicated SID80X800) is discontinued. The exact drop-in replacement is the SAID80X800, which shares the same ISO 15552 interface, bore, stroke, G3/8 port, and mounting. The SAI family also adds upgraded piston seals and SAIL/BSAI lock variants.
It is a double-acting double-rod cylinder with force equal both ways: 2268 N @0.5 MPa, 3175 N @0.7 MPa, and 4082 N @0.9 MPa. The air port is G3/8, the rod is 25 mm with M20x1.5 thread, and speed is 30-800 mm/s. It cannot hold a load on air loss; the cushion only decelerates.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID80X800
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID80X800 replacement — usually within 7-8 hours.