This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAID80X800S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAID80X800S in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X800S
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X800S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 800mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAID80X800S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke800 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID80X800S
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X800S
The AirTAC B06-SID80X800S is a double-acting, double-rod ISO 15552 cylinder where the B06- prefix marks it as a battery-manufacturing dedicated variant of the base SID80X800S, mechanically identical in every spec. A rod exits both ends on one piston, meaning both faces use the rod-side area and push/pull force is equal both ways at 2268 N @0.5 MPa, 3175 N @0.7 MPa, and 4082 N @0.9 MPa. The bore dictates a G3/8 air port, M20x1.5 rod thread, and 36 mm adjustable air cushions. This SID model is discontinued; the exact drop-in replacement is the SAID80X800S, which reuses the same ISO 15552 mounting interface and adds an upgraded piston seal with two Y-shaped one-way elements for lower start-up pressure and longer life.
Because the second rod can carry a sensor cam or drive two tools simultaneously while resisting rotation, the double-rod layout is ideal for battery cell stacking and handling. With a 0.5 MPa supply, the computed safe working load is roughly 1361 N (about 60% of the 2268 N figure), translating to a vertical lift capacity of approximately 116 kg with a 2:1 margin. The -S suffix indicates a built-in piston magnet for legacy CS1-B/DS1-B switches. Note that a plain cylinder does not hold loads on air loss; the cushion only decelerates near stroke end, so use an external rod lock or SAIL/BSAI variant for held loads.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X800S Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X800S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID80X800S |
| Bore size | Ø80 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID80X800S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The B06-SAID80X800S produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X800S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X800S Is Used
Battery Cell Stacking
Equal both-ways force and anti-rotation from the double-rod design provide precise, stable pressure for stacking battery cells in module assembly.
Pack Handling Transfer
The rear rod can carry a sensor cam while the front rod drives a gripper, synchronizing the transfer of battery packs along the line.
Tab Welding Clamp
Drives two tools simultaneously from one piston, ensuring balanced clamping force on battery tabs during the welding process.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X800S with the B06-SAID80X800S
To replace the discontinued B06-SID80X800S, select the SAID80X800S, which offers an identical ISO 15552 interface, 80 mm bore, 800 mm stroke, G3/8 port, and equal both-ways force. When sizing both ways, verify that 2268 N @0.5 MPa (or 3175 N @0.7 MPa) meets your push and pull requirements, or step to neighbouring bores like 63 mm or 100 mm to scale the equal force. A double rod is right when you need anti-rotation, a back rod for a sensor cam, or to drive two tools. Reuse FA, LB, or TC mounts directly. The -S magnet supports legacy CS1-B/DS1-B sensors. For this 800 mm stroke, add external guides to prevent rod bending and manage side loads.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID80X800S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID80X800S FAQ
Yes, the B06-SID80X800S (battery-manufacturing dedicated variant of SID80X800S) is discontinued. The exact drop-in replacement is the SAID80X800S. It shares the same ISO 15552 interface, bore, stroke, G3/8 port, and mounting, but adds an upgraded piston seal.
Force is equal both ways at 2268 N @0.5 MPa, 3175 N @0.7 MPa, and 4082 N @0.9 MPa. The 80 mm bore uses a G3/8 air port, a 25 mm rod, an M20x1.5 rod thread, and 36 mm adjustable cushions. Speed is 30-800 mm/s.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID80X800S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID80X800S replacement — usually within 7-8 hours.