
The AirTAC B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X800S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 800mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC B06-SAID80X800S is a double-acting, double-rod ISO 15552 profile cylinder. The leading "B06-" prefix marks this as a battery-manufacturing dedicated variant of the SAID80X800-S, meaning it is mechanically identical to the standard model but designated for cell and pack assembly lines. Because the twin rods occupy both sides of the piston, the annulus area is symmetrical, yielding exactly 2268 N of force in both extend and retract directions at 0.5 MPa.
The through-rod design allows you to mount a workpiece on the front end and a position flag or cam on the rear. It includes a magnet for CMSE reed and DMSE electronic sensors, fitting into the dual-side grooves of the extruded aluminum barrel. Adjustable air cushions at both ends decelerate the piston, though an external guide is recommended for this 800 mm stroke to manage rod-bearing bending.
| Model | Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X800S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives precision stacking mechanisms in module assembly, using the symmetric both-way force to push and retract cell layers evenly.
Actuates two synchronized handling stations simultaneously by mounting a tool on the front rod end and a secondary driver on the rear.
Guides heavy pack handling fixtures along the production line, leveraging the double-rod geometry to resist torsional twist during transit.
Choose this 80 mm bore when an application requires symmetric push and pull forces, stepping up from a 63 mm bore (1402 N both ways at 0.5 MPa) to gain 2268 N. A double-rod configuration is preferred over a single-rod SAI when you need dual-side guidance to prevent rotation, or when a rear rod is needed to drive a second mechanism. Note that a plain SAID does not hold its load when air pressure is lost; for battery stacking tasks requiring position holding without live pressure, consider a BSAID clamp-lock or an external pilot-operated check valve.
This cylinder is dimensionally interchangeable per ISO 15552. To match this model, specify an 80 mm bore, 800 mm stroke, PT tapered port threads (G3/8), and the -S magnet. The available mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Because the stroke is 800 mm, ensure an external guide supports the load to prevent excessive side-loading on the rod bearings.
Quick checklist
Because it is a double-rod cylinder, the effective area is the same on both sides. It outputs 2268 N in both extend and retract directions at 0.5 MPa, and 3175 N at 0.7 MPa.
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the SAID80X800-S. It is mechanically identical to the standard double-rod cylinder, featuring the same ISO 15552 dimensions, G3/8 port, and 800 mm stroke, but is designated for battery production lines.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.