Airtac BSED Clamping Double Acting Cylinder BSED100X160S
The AirTAC Airtac BSED Clamping Double Acting Cylinder BSED100X160S combines a double-rod ISO 15552 cylinder — a Ø25mm rod out BOTH ends for equal force both directions — with an integrated spring-applied, air-released ROD LOCK that holds up to 5500 N in either direction if air is lost. Ø100mm bore, 160mm stroke, PT1/2 ports, G1/8 lock-release.
- BoreØ100 mm
- Stroke160 mm
- Static holding force5500 N
- ConfigurationDouble rod + lock
- Cylinder portPT1/2
- Lock-release portG1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSED Clamping Double Acting Cylinder BSED100X160S
The AirTAC BSED100X160S is a double-acting, double-rod ISO 15552 profile cylinder with an integrated spring-applied, air-released rod lock. A rod exits both ends, delivering equal thrust in both directions at about 3681 N each way at 0.5 MPa. The internal collet lock delivers a 5500 N static holding force, clamping the 25 mm rod instantly upon air loss or an E-stop trip.
This extruded aluminum body avoids external tie rods while maintaining a true ISO 15552 mounting interface. The lock uses a separate G1/8 release port and operates at 0.15-0.7 MPa. Because the -S option adds a magnet, you can track position with CMSE reed or DMSE electronic sensors, while the 36 mm adjustable air cushions absorb end-of-stroke kinetic energy.
Double Rod + 5500 N Rod Lock (Ø100mm)
A rod exits both ends for symmetric force and back-rod tooling, and a spring clamps the collet so the Airtac BSED Clamping Double Acting Cylinder BSED100X160S holds its position in both directions on air loss or E-stop. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage only after the rod has stopped (not a dynamic brake), and release only when both piston sides are pressure-balanced; allow ≥0.5 s for full release.
Airtac BSED Clamping Double Acting Cylinder BSED100X160S Technical Specifications
| Model | Airtac BSED Clamping Double Acting Cylinder BSED100X160S |
|---|---|
| Series | BSED ISO 15552 double-rod rod-lock cylinder |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Static holding force | 5500 N |
| Cylinder port | PT1/2 |
| Lock-release port | G1/8 |
| Configuration | Double rod, double acting |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC BSED datasheet. Rod thread M20×1.5 both ends. Mounting (BSED): Basic, LB, FA, TC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa (max) | 5154 N |
| Max drive (@0.7 MPa) | 526 kgf |
A rod exits both ends, so force is equal on extend and retract. Drive force is separate from the 5500 N static lock holding force. Size with a safety margin.
Model Code: Airtac BSED Clamping Double Acting Cylinder BSED100X160S
| B | Rod-lock cylinder prefix. |
|---|---|
| SED | ISO 15552 double-rod double-acting body. |
| 100 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSED): Basic, LB, FA, TC. Related: SED (double rod, no lock), BSE (single-rod rod lock). Sensors CMSE/DMSE fit magnetic BSED.
Where the Airtac BSED Clamping Double Acting Cylinder BSED100X160S Is Used
Symmetric Conveyor Diverters
Drive 5153 N equal thrust in both directions for diverter arms, while the 5500 N lock holds the arm rigidly mid-stroke during an air pressure drop.
Overhead Z-Axis Safety
Prevent vertical drops on heavy 100 mm actuators; the spring-applied collet clamps the 25 mm rod with 5500 N of static force the moment live air is removed.
Dual-Tool Machining Jigs
Mount a workpiece clamp on the front rod and a proximity flag on the rear rod, using equal both-way force for stable machining and the lock for zero-shift E-stop holding.
Is the Airtac BSED Clamping Double Acting Cylinder BSED100X160S the Right Cylinder?
Select this 100 mm bore when a process demands symmetric 5153 N bi-directional force at 0.7 MPa alongside a 5500 N fail-safe hold. If your load requires less force, the 80 mm bore offers 2268 N at 0.5 MPa with a 3600 N hold. For heavier payloads, stepping up is not an option as 100 mm is the largest standard size before the 125 mm bore, which provides 5734 N at 0.5 MPa and an 8600 N hold. Always verify your static load is under 5500 N.
Engage the collet lock only after the rod completely stops, and release it only when both piston sides are pressure-balanced, allowing at least 0.5 seconds for the transition. When replacing a unit, match the 100 mm bore, 160 mm stroke, PT1/2 cylinder port, and your specific mounting choice (Basic, LB, FA, or TC).
Quick checklist
- ✓ Need both symmetric force AND fail-safe hold?
- ✓ Load to hold ≤ 5500 N?
- ✓ Back-rod space for tooling/flag
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Support both rod ends; avoid side load.
- check Use BSED mounting (Basic/LB/FA/TC).
Airtac BSED Clamping Double Acting Cylinder BSED100X160S FAQ
The spring-applied collet immediately clamps the rod, providing a 5500 N bidirectional static holding force with no live air. It is a fail-safe holding lock, not a dynamic brake, so it must engage only after the rod stops moving.
The double-rod design provides equal drive force both ways: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 525 kgf. The separate fail-safe rod lock provides a 5500 N static holding force.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSED Cylinders
Request a Quote for Airtac BSED Clamping Double Acting Cylinder BSED100X160S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.