Airtac BSED Clamping Double Acting Cylinder BSED63X200S
The AirTAC Airtac BSED Clamping Double Acting Cylinder BSED63X200S combines a double-rod ISO 15552 cylinder — a Ø20mm rod out BOTH ends for equal force both directions — with an integrated spring-applied, air-released ROD LOCK that holds up to 2200 N in either direction if air is lost. Ø63mm bore, 200mm stroke, PT3/8 ports, G1/8 lock-release.
- BoreØ63 mm
- Stroke200 mm
- Static holding force2200 N
- ConfigurationDouble rod + lock
- Cylinder portPT3/8
- Lock-release portG1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSED Clamping Double Acting Cylinder BSED63X200S
The AirTAC BSED63X200S is a double-acting, double-rod ISO 15552 profile cylinder featuring an integrated spring-applied, air-released rod lock. A rod exits both ends, delivering equal force in both directions—about 1402 N each way at 0.5 MPa. The rear rod provides an excellent mounting point for tooling or flags while actively resisting rotational twist.
This fail-safe collet lock clamps the rod bidirectionally with a static holding force of 2200 N, maintaining position without live air if pressure drops or an E-stop trips. Operating pressure is capped at 0.7 MPa, and the lock releases via a separate G1/8 port. The integrated -S magnet supports CMSE reed and DMSE electronic sensors for precise position feedback.
Double Rod + 2200 N Rod Lock (Ø63mm)
A rod exits both ends for symmetric force and back-rod tooling, and a spring clamps the collet so the Airtac BSED Clamping Double Acting Cylinder BSED63X200S holds its position in both directions on air loss or E-stop. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage only after the rod has stopped (not a dynamic brake), and release only when both piston sides are pressure-balanced; allow ≥0.5 s for full release.
Airtac BSED Clamping Double Acting Cylinder BSED63X200S Technical Specifications
| Model | Airtac BSED Clamping Double Acting Cylinder BSED63X200S |
|---|---|
| Series | BSED ISO 15552 double-rod rod-lock cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Static holding force | 2200 N |
| Cylinder port | PT3/8 |
| Lock-release port | G1/8 |
| Configuration | Double rod, double acting |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC BSED datasheet. Rod thread M16×1.5 both ends. Mounting (BSED): Basic, LB, FA, TC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa (max) | 1962 N |
| Max drive (@0.7 MPa) | 200 kgf |
A rod exits both ends, so force is equal on extend and retract. Drive force is separate from the 2200 N static lock holding force. Size with a safety margin.
Model Code: Airtac BSED Clamping Double Acting Cylinder BSED63X200S
| B | Rod-lock cylinder prefix. |
|---|---|
| SED | ISO 15552 double-rod double-acting body. |
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSED): Basic, LB, FA, TC. Related: SED (double rod, no lock), BSE (single-rod rod lock). Sensors CMSE/DMSE fit magnetic BSED.
Where the Airtac BSED Clamping Double Acting Cylinder BSED63X200S Is Used
Vertical Lifting Jigs
Lifts 200 kgf loads at 0.7 MPa with equal both-way force, while the 2200 N fail-safe collet locks the rod instantly if air pressure is lost.
Multi-Station Machining
The double-rod design resists rotational twist during part clamping, and the rear rod allows mounting a cam flag to trigger DMSE electronic sensors.
Pallet Stop Gates
Holds indexing pallets securely in place without consuming live air, releasing quickly via the G1/8 port once the system is pressure-balanced.
Is the Airtac BSED Clamping Double Acting Cylinder BSED63X200S the Right Cylinder?
Select this 63 mm bore when an application demands both symmetric drive force and reliable mid-stroke holding. Verify your load requires no more than 2200 N of static holding force. If you need less force, the 50 mm bore offers 825 N at 0.5 MPa and 1400 N holding; if you need more, step up to the 80 mm bore for 2268 N at 0.5 MPa and 3600 N holding.
Engage the lock only after the rod completely stops, and release it only when both piston sides are pressure-balanced, allowing at least 0.5 seconds for the transition. To replace this unit, match the 63 mm bore, 200 mm stroke, PT3/8 cylinder port, and -S magnet option. For strokes of 300 mm or longer, add external guide rails to prevent excessive side loading on the rod.
Quick checklist
- ✓ Need both symmetric force AND fail-safe hold?
- ✓ Load to hold ≤ 2200 N?
- ✓ Back-rod space for tooling/flag
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Support both rod ends; avoid side load.
- check Use BSED mounting (Basic/LB/FA/TC).
Airtac BSED Clamping Double Acting Cylinder BSED63X200S FAQ
The spring-applied collet immediately engages to provide a 2200 N static holding force, clamping the rod bidirectionally at its current position without any live air. It is a fail-safe holding lock, not a dynamic brake, so it must only be engaged after the rod has stopped moving.
This double-rod cylinder provides equal drive force in both directions: 1402 N at 0.5 MPa and 1962 N at 0.7 MPa, with a maximum drive force of 200 kgf. Separately, the integrated rod lock provides a 2200 N static holding force.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSED Cylinders
Request a Quote for Airtac BSED Clamping Double Acting Cylinder BSED63X200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.