Airtac BSED Clamping Double Acting Cylinder BSED63X700S
The AirTAC Airtac BSED Clamping Double Acting Cylinder BSED63X700S combines a double-rod ISO 15552 cylinder — a Ø20mm rod out BOTH ends for equal force both directions — with an integrated spring-applied, air-released ROD LOCK that holds up to 2200 N in either direction if air is lost. Ø63mm bore, 700mm stroke, PT3/8 ports, G1/8 lock-release.
- BoreØ63 mm
- Stroke700 mm
- Static holding force2200 N
- ConfigurationDouble rod + lock
- Cylinder portPT3/8
- Lock-release portG1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSED Clamping Double Acting Cylinder BSED63X700S
The AirTAC BSED63X700S is a double-acting, double-rod ISO 15552 profile cylinder featuring an integrated spring-applied, air-released rod lock. A rod exits both ends, yielding equal force and speed in both directions—delivering 1402 N each way at 0.5 MPa and 1962 N at 0.7 MPa. The rear rod can carry a flag or cam and naturally resists rotation.
The fail-safe collet lock provides a bidirectional static holding force of 2200 N without requiring live air. If pressure drops or an E-stop trips, the rod is clamped securely at its position. A separate G1/8 release port controls the lock, and the -S magnet option enables position tracking with CMSE reed or DMSE electronic sensors.
Double Rod + 2200 N Rod Lock (Ø63mm)
A rod exits both ends for symmetric force and back-rod tooling, and a spring clamps the collet so the Airtac BSED Clamping Double Acting Cylinder BSED63X700S holds its position in both directions on air loss or E-stop. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage only after the rod has stopped (not a dynamic brake), and release only when both piston sides are pressure-balanced; allow ≥0.5 s for full release.
Airtac BSED Clamping Double Acting Cylinder BSED63X700S Technical Specifications
| Model | Airtac BSED Clamping Double Acting Cylinder BSED63X700S |
|---|---|
| Series | BSED ISO 15552 double-rod rod-lock cylinder |
| Bore size | Ø63 mm |
| Stroke | 700 mm |
| Static holding force | 2200 N |
| Cylinder port | PT3/8 |
| Lock-release port | G1/8 |
| Configuration | Double rod, double acting |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC BSED datasheet. Rod thread M16×1.5 both ends. Mounting (BSED): Basic, LB, FA, TC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa (max) | 1962 N |
| Max drive (@0.7 MPa) | 200 kgf |
A rod exits both ends, so force is equal on extend and retract. Drive force is separate from the 2200 N static lock holding force. Size with a safety margin.
Model Code: Airtac BSED Clamping Double Acting Cylinder BSED63X700S
| B | Rod-lock cylinder prefix. |
|---|---|
| SED | ISO 15552 double-rod double-acting body. |
| 63 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSED): Basic, LB, FA, TC. Related: SED (double rod, no lock), BSE (single-rod rod lock). Sensors CMSE/DMSE fit magnetic BSED.
Where the Airtac BSED Clamping Double Acting Cylinder BSED63X700S Is Used
Overhead Lift Stations
Holds a 2200 N vertical load securely during air loss while providing 1962 N of equal both-way lifting force for balanced vertical actuation.
Pallet Transfer Stops
Uses the dual rods to mount a stop blade on one end and a position cam on the rear, engaging the fail-safe lock to halt heavy pallet flow.
Multi-Position Machining
Delivers 1402 N of symmetric drive force to shuttle tooling between stations, locking the 20 mm rod instantly when E-stops activate.
Is the Airtac BSED Clamping Double Acting Cylinder BSED63X700S the Right Cylinder?
Select this 63 mm bore model when your application requires symmetric both-way drive force alongside a robust fail-safe hold. Verify your static load does not exceed the 2200 N holding capacity. If you need less force, the 50 mm bore offers 825 N at 0.5 MPa and a 1400 N hold; if you need more, step up to the 80 mm bore, which provides 2268 N at 0.5 MPa and a 3600 N hold.
Operating pressure is capped at 0.7 MPa, and the lock is spring-applied—engage it only after the rod stops, and release it only when both piston sides are pressure-balanced, allowing at least 0.5 seconds. For a direct replacement, match the 700 mm stroke, PT3/8 cylinder port, G1/8 release port, and your chosen mounting style (Basic, LB, FA, or TC). Because the stroke is 700 mm, use a guide to prevent excessive side-load wear on the seals.
Quick checklist
- ✓ Need both symmetric force AND fail-safe hold?
- ✓ Load to hold ≤ 2200 N?
- ✓ Back-rod space for tooling/flag
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Support both rod ends; avoid side load.
- check Use BSED mounting (Basic/LB/FA/TC).
Airtac BSED Clamping Double Acting Cylinder BSED63X700S FAQ
The double-rod design provides equal drive force in both directions: 1402 N at 0.5 MPa and 1962 N at 0.7 MPa (max 200 kgf). The integrated fail-safe rod lock provides a separate bidirectional static holding force of 2200 N with no live air required.
The lock is spring-applied and air-released via a dedicated G1/8 port. To release it safely, ensure both piston sides are pressure-balanced, apply release pressure between 0.15 and 0.7 MPa, and wait at least 0.5 seconds before moving. It is a static hold, not a dynamic brake, so only engage it after the rod has stopped.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSED Cylinders
Request a Quote for Airtac BSED Clamping Double Acting Cylinder BSED63X700S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.