Airtac BSED Clamping Double Acting Cylinder BSED63X80
The AirTAC Airtac BSED Clamping Double Acting Cylinder BSED63X80 combines a double-rod ISO 15552 cylinder — a Ø20mm rod out BOTH ends for equal force both directions — with an integrated spring-applied, air-released ROD LOCK that holds up to 2200 N in either direction if air is lost. Ø63mm bore, 80mm stroke, PT3/8 ports, G1/8 lock-release.
- BoreØ63 mm
- Stroke80 mm
- Static holding force2200 N
- ConfigurationDouble rod + lock
- Cylinder portPT3/8
- Lock-release portG1/8
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac BSED Clamping Double Acting Cylinder BSED63X80
The AirTAC BSED63X80 is a double-acting, double-rod ISO 15552 profile cylinder featuring an integrated spring-applied, air-released rod lock. A rod exits both ends, providing equal drive force in both directions—1402 N each way at 0.5 MPa and 1962 N at 0.7 MPa. The rear rod can carry tooling or a flag cam while resisting rotation.
The fail-safe collet lock delivers a 2200 N static holding force with zero live air, securing the load if pressure drops. It engages only after the rod stops and releases when piston sides are pressure-balanced, requiring at least 0.5 s. Operating pressure is capped at 0.7 MPa, and the lock uses a separate G1/8 release port. This SKU has no magnet, so position sensors are not supported.
Double Rod + 2200 N Rod Lock (Ø63mm)
A rod exits both ends for symmetric force and back-rod tooling, and a spring clamps the collet so the Airtac BSED Clamping Double Acting Cylinder BSED63X80 holds its position in both directions on air loss or E-stop. Apply 0.15–0.7 MPa to the G1/8 release port to unlock. Engage only after the rod has stopped (not a dynamic brake), and release only when both piston sides are pressure-balanced; allow ≥0.5 s for full release.
Airtac BSED Clamping Double Acting Cylinder BSED63X80 Technical Specifications
| Model | Airtac BSED Clamping Double Acting Cylinder BSED63X80 |
|---|---|
| Series | BSED ISO 15552 double-rod rod-lock cylinder |
| Bore size | Ø63 mm |
| Stroke | 80 mm |
| Static holding force | 2200 N |
| Cylinder port | PT3/8 |
| Lock-release port | G1/8 |
| Configuration | Double rod, double acting |
|---|---|
| Operating pressure | 0.15 – 0.7 MPa |
| Unlocking pressure | 0.15 – 0.7 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC BSED datasheet. Rod thread M16×1.5 both ends. Mounting (BSED): Basic, LB, FA, TC. Port options: PT (standard) / G (BSPP); lock-release port is G1/8.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa (max) | 1962 N |
| Max drive (@0.7 MPa) | 200 kgf |
A rod exits both ends, so force is equal on extend and retract. Drive force is separate from the 2200 N static lock holding force. Size with a safety margin.
Model Code: Airtac BSED Clamping Double Acting Cylinder BSED63X80
| B | Rod-lock cylinder prefix. |
|---|---|
| SED | ISO 15552 double-rod double-acting body. |
| 63 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Thread: PT (blank) / G. Mounting (BSED): Basic, LB, FA, TC. Related: SED (double rod, no lock), BSE (single-rod rod lock). Sensors CMSE/DMSE fit magnetic BSED.
Where the Airtac BSED Clamping Double Acting Cylinder BSED63X80 Is Used
Overhead Lift Stations
Holds a 2200 N vertical load safely during air loss or E-stop, while the double-rod delivers 1962 N of equal lifting and lowering force.
Pallet Stops
Uses the rear rod for a cam flag to confirm position, clamping the rod securely with no live air to halt heavy conveyor flow.
Shuttle Transfers
Equal 1402 N force at 0.5 MPa both ways ensures smooth part shuttling, with the collet lock preventing drift during station dwells.
Is the Airtac BSED Clamping Double Acting Cylinder BSED63X80 the Right Cylinder?
Choose this 63 mm bore when an application demands both symmetric force and fail-safe holding up to 2200 N. If your load to hold is lower, the 50 mm bore offers 1154 N drive force at 0.7 MPa and 1400 N holding. If you need more drive or hold, stepping up to the 80 mm bore provides 3175 N drive and 3600 N holding. Remember the lock is a static hold, not a dynamic brake; engage it only after motion stops. For replacements, match the 63 mm bore, 80 mm stroke, PT3/8 port, and mounting choice (Basic, LB, FA, or TC).
Quick checklist
- ✓ Need both symmetric force AND fail-safe hold?
- ✓ Load to hold ≤ 2200 N?
- ✓ Back-rod space for tooling/flag
- ✓ Lock engaged only when stopped
- ✓ G1/8 release-air line available
Installation & Safety Notes
- check Engage the lock only after the rod has stopped — not a dynamic brake.
- check Release only when both piston sides are pressure-balanced.
- check Allow ≥0.5 s for full release before commanding motion.
- check Feed the G1/8 release port with 0.15–0.7 MPa clean air.
- check Support both rod ends; avoid side load.
- check Use BSED mounting (Basic/LB/FA/TC).
Airtac BSED Clamping Double Acting Cylinder BSED63X80 FAQ
The lock provides a 2200 N static holding force with no live air. The double-rod drive force is equal both ways: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, with a max drive of 200 kgf.
Release the lock only after the rod has stopped moving and both piston sides are pressure-balanced. Allow at least 0.5 seconds for the spring-applied collet to disengage via the G1/8 release port before resuming motion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC BSED Cylinders
Request a Quote for Airtac BSED Clamping Double Acting Cylinder BSED63X80
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.