Airtac SAID200 Double Rod Cylinder SAID200X60
The AirTAC Airtac SAID200 Double Rod Cylinder SAID200X60 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø200mm bore and 60mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ200 mm
- Stroke60 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID200 Double Rod Cylinder SAID200X60
The AirTAC SAID200X60 is a double-acting, double-rod profile cylinder conforming to ISO 15552 standards. A single piston drives a carbon steel rod out of both end covers, yielding identical extend and retract forces. It delivers 15079 N of thrust each way at 0.5 MPa, ensuring symmetric power for heavy-duty motion.
Because the rod protrudes from the rear, you can mount a position flag or secondary cam opposite the primary workpiece. The extruded aluminum barrel features dual sensor grooves, and the adjustable air cushions at both ends absorb end-of-stroke impact. Threaded PT ports (G3/4) and a 30-500 mm/s speed range suit demanding industrial environments.
Airtac SAID200 Double Rod Cylinder SAID200X60 Technical Specifications
| Model | Airtac SAID200 Double Rod Cylinder SAID200X60 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø200 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | — |
| Max (@1.0 MPa) | 3075 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID200 Double Rod Cylinder SAID200X60
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID200 Double Rod Cylinder SAID200X60 Is Used
Heavy-Duty Pressing
Provides 15079 N of equal force in both directions for heavy pressing and forming tasks that require consistent push and pull power.
Twin-Station Actuation
Drives two separate mechanisms simultaneously using both rod ends, ensuring perfectly synchronized motion for multi-station assembly lines.
Anti-Rotation Slides
The dual-rod geometry prevents mechanical rotation under high off-center loads, keeping heavy workpieces guided and stable.
Is the Airtac SAID200 Double Rod Cylinder SAID200X60 the Right Cylinder?
Choose this 200 mm bore when an application requires immense bidirectional force (15079 N at 0.5 MPa) and strict anti-rotation guidance. If you need slightly less power, stepping down to a 160 mm bore yields 9425 N each way. The twin-rod design is preferred over a single-rod SAI when you need to drive twin stations or mount rear-side sensors. Note that a plain SAID does not hold its load when air is exhausted; for fail-safe holding, use a SAIL lock cylinder or an external rod lock.
Dimensionally interchangeable per ISO 15552, it uses PT port threads and supports mountings Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB/CA/CB/CR). This 60 mm stroke is well within standard limits, keeping the assembly compact.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID200 Double Rod Cylinder SAID200X60 FAQ
Because it is a double-rod cylinder, the effective piston area is identical on both sides. It provides an equal force of 15079 N in both extend and retract directions at 0.5 MPa, and 21110 N at 0.7 MPa.
Yes. The SAID200X60 is dimensionally interchangeable per ISO 15552 and serves as a direct replacement for other ISO 15552 double-rod cylinders, using the standard mounting interface and G3/4 ports.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAID200 Double Rod Cylinder SAID200X60
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.