The AirTAC Airtac SC32 Standard Cylinder SC32X95SH is a genuine double-acting standard air cylinder with a Ø32mm bore and 95mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X95SH is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at 0.9 MPa). With a 95 mm stroke and a 12 mm diameter piston rod, it fits neatly into light-duty clamping, sorting, and assembly fixtures where space is tight.
This model carries the -S magnet option for barrel-mounted CMSG/DMSG/EMSG sensors and the -H suffix for Viton (FKM) seals, shifting the operating temperature range to 0–150 °C. The 21 mm adjustable air cushion at each end helps decelerate the piston quietly, extending service life in high-cycle automation.
| Model | Airtac SC32 Standard Cylinder SC32X95SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
With Viton seals rated to 150 °C, this cylinder handles hot clamping and pressing operations near ovens or heated platens where standard seals would degrade.
The built-in magnet allows CMSG/DMSG sensors to confirm end-of-stroke, making the SC32X95SH ideal for diverting small parts on conveyors with positive position feedback.
Compact 32 mm bore and 95 mm stroke suit fluid handling and test-equipment actuators; Viton seals tolerate aggressive cleaning agents better than standard TPU.
Choose the SC32 when your load needs up to about 402 N at standard plant pressure. If you require more force, step up to the SC40 (628 N push at 0.5 MPa) for a moderate increase without a large dimensional jump. For strokes above 300 mm on this 12 mm rod, consider an external guide or a guided cylinder to protect the rod bearing from side loads.
When replacing an existing unit, match five points: 32 mm bore, 95 mm stroke, PT port thread, the built-in magnet (-S), and the Viton seal (-H). The SC is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
At 0.5 MPa (≈73 psi) the cylinder pushes with 402 N. At the maximum operating pressure of 0.9 MPa, push force reaches 724 N. Pull force at 0.5 MPa is 345 N due to the 12 mm rod area.
No. The SC series is a tie-rod cylinder and is shorter than an ISO 15552 profile cylinder of the same bore and stroke. It only replaces another AirTAC SC (or equivalent tie-rod) cylinder with matching bore, stroke, PT port, magnet option, and Viton seals.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.