Airtac SCT80~100 Multi-Position Tandem Cylinder SCT100X165X165S
The AirTAC Airtac SCT80~100 Multi-Position Tandem Cylinder SCT100X165X165S is a genuine double-acting MULTI-POSITION (tandem) air cylinder: two piston sections of 165mm and 165mm give 3 controllable stop positions across a 330mm total travel, with a Ø100mm bore, PT1/2 ports and adjustable end cushioning.
- BoreØ100 mm
- Stroke 1165 mm
- Stroke 2165 mm
- Total travel330 mm
- Positions3 stops
- Port sizePT1/2
About the Airtac SCT80~100 Multi-Position Tandem Cylinder SCT100X165X165S
The SCT100X165X165S is a double-acting multi-position cylinder that provides three fixed rod positions: fully retracted (0 mm), 165 mm, and full extension at 330 mm. Each piston section generates a push force of 3927 N at 0.5 MPa, scaling up to a powerful 7068 N at the maximum operating pressure of 0.9 MPa, driven by a 25 mm diameter rod.
This model includes an integrated magnet, allowing CMSG, DMSG, or EMSG sensors to be clamped directly onto the tie-rod barrel for reliable end-of-stroke or intermediate position sensing. With a body length of 308 mm and a generous 29 mm adjustable air cushion, it is built to handle substantial inertial loads in sorting and diverting applications.
Airtac SCT80~100 Multi-Position Tandem Cylinder SCT100X165X165S Technical Specifications
| Model | Airtac SCT80~100 Multi-Position Tandem Cylinder SCT100X165X165S |
|---|---|
| Series | SCT multi-position tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke 1 / Stroke 2 | 165 / 165 mm |
| Total travel | 330 mm |
| Stop positions | 3 positions |
| Acting type | Double acting (tandem, multi-position) |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke / section | Up to 500 mm standard |
Specifications follow the official AirTAC SCT (multi-position) datasheet. SCT is available in bores 32–100; each of the two sections has a 500 mm max standard stroke (800 mm max). Confirm against the product label before installation. Thread options: PT (standard) / G.
Stop Positions (3)
| Position | Rod extension |
|---|---|
| P0 (retracted) | 0 mm |
| P1 (section 1) | 165 mm |
| P2 (both extended) | 330 mm |
Positions are set by pressurising section 1, section 2, or both. With equal strokes you get 3 distinct positions; with unequal strokes you get 4.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Force is per actuated piston section (single-piston, same as the SC bore): push uses the full bore area, pull subtracts the rod area. Size with a safety margin.
Model Code: Airtac SCT80~100 Multi-Position Tandem Cylinder SCT100X165X165S
| SCT | Multi-position (tandem) tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm (SCT range 32–100). |
| ×165 | Stroke 1 (section 1) in mm. |
| ×165 | Stroke 2 (section 2) in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod), SCD (double rod), SCJ (adjustable stroke). SCT mounting: Basic, FA, FB, CA, CB, LB. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SCT80~100 Multi-Position Tandem Cylinder SCT100X165X165S Is Used
3-Position Sorting Gate
Uses the three distinct stops (0, 165, 330 mm) to divert packages or components onto three separate conveyor lanes, controlled simply by pressurising one or both cylinder sections.
Two-Depth Pressing Station
Performs a two-stage pressing operation: a partial press at 165 mm for pre-forming, followed by a full-depth press at 330 mm, all within a single compact actuator package.
Multi-Stop Feeding Mechanism
Advances material strips or components in precise 165 mm increments. The built-in magnet allows sensors to confirm each stop position, ensuring accurate feed length for automated assembly.
Is the Airtac SCT80~100 Multi-Position Tandem Cylinder SCT100X165X165S the Right Cylinder?
This 100 mm bore tandem cylinder is a compact alternative to mounting two separate SC100 cylinders back-to-back, eliminating the need for complex alignment and reducing the machine footprint. If your application requires a higher force density, consider the 80 mm bore SCT80 which delivers 2513 N of push per section at 0.5 MPa. For replacement, ensure you match the100 mm bore, both 165 mm strokes, PT port thread, basic mounting, and the -S magnet option.
Given the 330 mm total extension, evaluate the side load on the 25 mm rod. For long-stroke applications with significant radial forces, an external guide rail or rod support is recommended to prevent bending and ensure seal longevity.
Multi-position checklist
- ✓ Need 3 repeatable stops?
- ✓ Section strokes 165 + 165 mm suit your layout?
- ✓ Required force at your working pressure
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Plumb the two sections to the correct valves for each stop.
- check Adjust end cushion screws for smooth stops.
- check Use SCT mounting accessory (FA / FB / CA / CB / LB).
- check Installation by qualified personnel per AirTAC docs.
Airtac SCT80~100 Multi-Position Tandem Cylinder SCT100X165X165S FAQ
This model has 3 distinct mechanical stop positions because both stroke sections are equal at 165 mm. The rod positions are 0 mm (fully retracted), 165 mm (one section extended), and 330 mm (both sections extended, total travel).
Each of the two piston sections independently provides 3927 N of push force and 3681 N of pull force when operated at 0.5 MPa. At the maximum operating pressure of1.0 MPa, the theoretical push force per section is 7854 N. The forces do not add together for a combined output.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCT Multi-Position Cylinders
Request a Quote for Airtac SCT80~100 Multi-Position Tandem Cylinder SCT100X165X165S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.