Airtac SC100 Standard Cylinder SC100X330
The AirTAC Airtac SC100 Standard Cylinder SC100X330 is a genuine double-acting standard air cylinder with a Ø100mm bore and 330mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke330 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X330
The SC100X330 is a 100 mm bore, 330 mm stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod series. It delivers a push force of 3927 N at 0.5 MPa and reaches 7068 N at the maximum operating pressure of 0.9 MPa, making it a robust actuator for medium-to-heavy linear motion tasks. The 25 mm diameter piston rod and 29 mm adjustable air cushion at each end help manage end-of-stroke deceleration effectively.
With a body length A of 188 mm, the total extended length of this cylinder is approximately 518 mm. It uses a PT1/2 port and an M20x1.5 rod thread. The standard TPU seals provide an operating temperature range of -20 to +70 °C. This model is a basic configuration without a magnet or mounting accessories, ready for direct integration or custom bracketry.
Airtac SC100 Standard Cylinder SC100X330 Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X330 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 330 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X330
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×330 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X330 Is Used
Pallet Stop & Transfer
Provides the 3927 N push force needed at 0.5 MPa to reliably stop and transfer heavy pallets on conveyor lines, with the adjustable cushion absorbing impact.
Press & Clamping Fixtures
Delivers up to 7068 N of clamping force at 0.9 MPa for holding large workpieces during machining or welding, ensuring rigid, vibration-free positioning.
Bin Diverter Gate Actuation
The 330 mm stroke provides ample travel to swing heavy diverter gates in material handling chutes, directing bulk product flow between silos or bins.
Is the Airtac SC100 Standard Cylinder SC100X330 the Right Cylinder?
Choose the SC100X330 when your application needs around 3900 N of force at standard shop air. If you require a more compact unit with lower force, the 80 mm bore SC80 series provides 2513 N push at 0.5 MPa. For higher force in the same tie-rod family, the SC125 series offers 6136 N at 0.5 MPa. At 330 mm of stroke, the rod has significant extension; ensure side loads are minimal or use an external guide to prevent rod bearing damage and bending.
For a direct replacement, match these five points: 100 mm bore, 330 mm stroke, PT1/2 port thread, basic (no integrated) mounting, and no magnet. This ensures physical and pneumatic interchangeability with an existing AirTAC SC100 cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X330 FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No, the SC100X330 is not designed for direct side loads. With a 330 mm stroke and a 25 mm rod, applying a side load can bend the rod or damage the bearing. You must use an external guide rail system or a guided cylinder variant to absorb transverse forces.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X330
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.