The AirTAC AirTAC SE100X600 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 600mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X600 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a robust 3927 N push force at 0.5 MPa and a maximum thrust of 801 kgf at 1.0 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a flush exterior that resists corrosion and simplifies direct mounting on machinery frames.
This 100 mm bore unit features a PT1/2 port and a 25 mm hard-chrome piston rod with an M20x1.5 thread. Field-adjustable pneumatic cushioning at both stroke ends allows technicians to dial in end-of-stroke deceleration for the 600 mm travel, protecting payloads from harsh impacts. Because this specific SKU lacks the -S magnet option, it does not support direct CMSE or DMSE position sensing without modification.
| Model | AirTAC SE100X600 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Handles the 600 mm stroke to pull and fold large corrugated cardboard panels, utilizing the 3927 N push force to reliably square heavy boxes before sealing.
Drives upper die clamps on a large press brake, where the 100 mm bore's 5497 N push at 0.7 MPa ensures rigid positioning of heavy tooling segments.
Acts as a heavy-duty stop gate on a roller conveyor, using the 36 mm cushion length to smoothly decelerate 1000 kg pallets without harsh mechanical slamming.
If your application requires less force, stepping down to the 80 mm bore yields a 2513 N push at 0.5 MPa, whereas moving up to the 125 mm bore provides a 6136 N push. The 600 mm stroke on this model falls within the standard range but is long enough that side loads can induce severe rod-bearing bending; always support the load with an external linear guide to prevent premature seal failure. Remember that the adjustable air cushion only decelerates the piston near stroke end—it is not a mechanical lock. If the system must hold a vertical load without live air pressure, pair this cylinder with a BSE rod lock or an external pilot-operated check valve. As a true ISO 15552 profile cylinder, it serves as a drop-in replacement for other ISO 15552 cylinders, sharing identical mounting interface dimensions and accessories.
Quick checklist
The SE100X600 generates a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. At 0.7 MPa, the push force is 5497 N, and the maximum push is 801 kgf at 1.0 MPa. It uses a PT1/2 port and a 25 mm rod with an M20x1.5 thread.
Yes, it is dimensionally interchangeable with other ISO 15552 profile cylinders, sharing identical mounting interface dimensions for easy retrofits. However, it does not hold its position when air is exhausted; the adjustable cushion only decelerates the piston near stroke end, so you must use a BSE rod lock or external check valve for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.