The AirTAC AirTAC SE100X900 ISO 15552 Cylinder | 100mm Bore is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 900mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
The AirTAC SE100X900 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. Operating at 0.5 MPa, it generates 3927 N of push force and 3681 N of pull force, scaling up to a maximum push of 801 kgf at 1.0 MPa. The extruded aluminum barrel design eliminates external tie rods, creating a smooth, compact exterior that resists corrosion and mounts flush against machine frames.
This 100mm bore unit features a PT1/2 port and a 25mm piston rod with an M20x1.5 thread. Because this specific SKU lacks the -S magnet suffix, it does not support direct CMSE or DMSE position sensing without modification. Field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts when moving heavy loads at speeds up to 800 mm/s.
| Model | AirTAC SE100X900 ISO 15552 Cylinder | 100mm Bore |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Leveraging its 3927 N push force at 0.5 MPa, this cylinder pushes heavy loaded pallets off a main conveyor line onto a branch spur, utilizing the full 900mm stroke to ensure complete diversion without collision.
Provides the robust 5497 N extending force at 0.7 MPa required to eject large molded plastic components from heavy tooling, absorbing the sudden mass transfer using its adjustable pneumatic cushions.
Utilizes its 801 kgf maximum thrust and 900mm travel to flatten and press thick steel plates in a primary forming station, relying on the 25mm rod and M20x1.5 thread to handle high mechanical stress.
Selecting the SE100X900 is appropriate when your application requires substantial thrust over a long 900mm span. If you need to step down to save air and space, the 80mm bore provides 2513 N push at 0.5 MPa. If you need to step up for heavier payloads, the 125mm bore offers 6136 N push at 0.5 MPa. Because this model has a 900mm stroke, the extended 25mm rod is subject to bending moments under side loads; always pair it with an external guide rail to prevent rod-bearing wear.
As a true ISO 15552 profile cylinder, it serves as a drop-in replacement for any standard 100mm bore, 900mm stroke ISO 15552 cylinder, matching mounting interface dimensions and standard PT1/2 ports without requiring custom brackets. Note that the adjustable pneumatic cushioning only decelerates the piston near stroke end; it is not a braking device. If the machine loses air pressure, the cylinder will drift, so integrate an external rod lock or pilot-operated check valve for position holding.
Quick checklist
The SE100X900 generates a push force of 3927 N and a pull force of 3681 N at 0.5 MPa. At 0.7 MPa, the push force is 5497 N. The maximum rated push force is 801 kgf when operated at the 1.0 MPa pressure limit.
No, the air cushioning only decelerates the piston near the end of the stroke and does not lock the rod. If air is lost, the cylinder will drift. For load holding, you need an external rod lock or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.