Airtac X-EPC Threaded Straight Adapter X-EPC4M10
AirTAC X-EPC4M10 Threaded Straight Fitting Technical Details
- Model: X-EPC4M10
- Type: Double-ended male threaded straight connector
- Material: Nickel-plated brass (Stainless steel variant available as X-EPC4M10-SS)
- Thread Specification: M10×1.0 metric fine thread (ISO 6149 compliant)
- Port Configuration: M10×1.0 (Male) × M10×1.0 (Male)
- Tube OD Compatibility: 4mm (5/32") pneumatic tubing
- Max Working Pressure: 1.5 MPa (217 psi)
- Temperature Range: -5℃ to 80℃ (23℉ to 176℉)
- Seal Material: HNBR (Hydrogenated Nitrile) with PTFE backup ring
- Surface Treatment: Electroless nickel plating (3-5μm thickness)
- Vibration Resistance: ≤10Hz @ 2.5mm amplitude
- Weight: 19.8g ±0.5g
- Dimensions: 30mm(L) × 14mm(W) × 14mm(H) (Hex width: 14mm, Total length including threads: 30mm)
- Thread Engagement Depth: 8mm per side
- Certifications: RoHS 2011/65/EU, REACH SVHC 219 substances
Precision-machined straight-through pneumatic connector featuring dual male threads with leak-proof design. The 60° cone seat interface ensures bubble-tight sealing under dynamic pressure conditions. Anti-vibration grooves prevent spontaneous loosening in mobile applications. Compatible with air, water, and non-corrosive hydraulic fluids.
- Pneumatic cylinder port extensions
- Modular manifold block interconnections
- Vacuum system component interfacing
- Sensor mounting interfaces in automation lines
- Tool-free tubing connection points
Installation protocol:
Apply 2-3 drops of pneumatic sealant (Loctite 577 recommended) on threads before assembly.
Tighten to 12-15 N·m torque using crowfoot wrench. Maximum 1/2 rotation after seal contact.
Perform pressure test at 1.8 MPa before system commissioning.
- Direct pairing with XM/L series manifolds
- Matched with Ø4mm PU/Nylon tubing (AT-04/AS-04)
- Requires X-TB04 tube inserts for push-to-connect models
| Property | Property Value |
|---|---|
| sku | X-EPC4M10 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.