Airtac X-EPHF Connector - In-Line Swivel Elbow X-EPHF402
AirTAC X-EPHF402 Series Tandem Elbow Joint Specifications
- Model: X-EPHF402
- Type: Tandem elbow joint with dual rotation axes
- Thread specification: M5×0.8 female threads (both ends)
- Material: Aluminum alloy body with nickel-plated brass fittings
- Operating pressure: 0.05-0.7 MPa
- Temperature range: -20℃ to 80℃
- Horizontal rotation: ±25° per axis
- Vertical tilt angle: ±15°
- Installation torque: 2.5-3 Nm (recommended)
- Weight: 85g ±3g
- Dimensions: 32mm(L) × 20mm(W) × 20mm(H)
- Surface hardness: HV400±20 (anodized treatment)
- Leakage rate: <0.05 mL/min under 0.5 MPa
Precision tandem elbow joint featuring bi-directional angular compensation, designed for complex pneumatic circuit routing in confined spaces. The dual-axis design allows compound angle adjustments while maintaining consistent airflow. Hard-anodized surfaces provide scratch resistance in high-cycle applications.
- Multi-axis robotic end effector connections
- Compact automation tool changers
- Precision dispensing systems
- Semiconductor wafer handling robots
- Medical device pneumatic assemblies
- Packaging machine rotary unions
Installation note:
Apply thread sealant (PTFE tape or liquid sealant) on male threads before assembly.
Avoid exceeding maximum torque to prevent brass insert deformation. For optimal performance,
conduct angular adjustment before final tightening and perform 5-10 test cycles.
- Relubricate rotating surfaces every 500,000 cycles using silicone-based grease
- Inspect O-rings (NBR material) quarterly in continuous operation
- Max lateral load: 15N (prolonged), 35N (instantaneous)
| Property | Property Value |
|---|---|
| sku | X-EPHF402 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.