Airtac B04-SID Construction Machinery Special ISO Standard Cylinder B04-SID80X350
AirTAC B04-SID80X350 Construction Machinery ISO Cylinder Specifications
- Full Model: B04-SID80X350
- Series: B04-SID (Heavy-Duty Construction Series)
- Standard: ISO 15552 compliant
- Bore Size: 80mm
- Stroke: 350mm
- Operating Pressure: 0.1-1.0 MPa
- Cushioning: Adjustable pneumatic cushion (both ends)
- Material:
- Tube: Hard anodized aluminum alloy
- Piston Rod: Chrome-plated steel (Rod Diameter: 25mm)
- End Caps: Reinforced cast iron
- Seals: HNBR (Hydrogenated Nitrile) with wear indicator
- Port Size: G3/8 (ISO standard tapered thread)
- Operating Temperature: -20℃ to +80℃
- Weight: 6.8kg (dry, without accessories)
- Dimensions:
- Total Length: 578mm (at mid-stroke position)
- Body Diameter: 98mm
- Mounting Center Distance: 60mm
- Rod End Thread: M16x1.5
- Protection Class: IP65 (rod gland area), IP54 (entire unit)
- Lubrication: Pre-lubricated (Molykote 33M)
Heavy-wall cylinder with anti-impact design for construction equipment, featuring double-sealed rod gland and shock-absorbing end caps. The wear-resistant piston guide ring ensures alignment stability under lateral loads. Requires 5-40μm filtered compressed air with 1-10mg/m³ oil mist lubrication.
- Excavator bucket positioning mechanisms
- Concrete pump truck outrigger controls
- Pile driver hammer weight actuators
- Crane boom locking systems
- Rock crusher jaw plate adjusters
Installation Protocol:
Requires torque-controlled mounting (M10 bolts at 45Nm ±5%) with vibration-damping washers.
Must install rod wiper (included) when used in high-dust environments. Maximum allowable
side load: 220N at full extension. Perform 50-cycle run-in before full-load operation.
| Property | Property Value |
|---|---|
| sku | B04-SID80X350 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.