This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement B06-SAID100X1000, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X1000
The AirTAC Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X1000 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 1000mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B06-SAID100X1000, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke1000 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → B06-SAID100X1000
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X1000
The AirTAC B06-SID100X1000 is a double-acting, double-rod ISO 15552 cylinder where a rod exits both ends, yielding equal force in both directions (3681 N at 0.5 MPa). The B06- prefix marks this as a battery-manufacturing dedicated variant, mechanically identical to the standard SID100X1000. It features a 100mm bore, G1/2 port, M20x1.5 rod thread, and 36mm adjustable cushions. This SID model is discontinued; the direct replacement is the SAID100X1000, sharing the same interface and force.
The SAI upgrade introduces a two Y-shaped one-way piston seal for lower start-up pressure and longer life. Note this non-magnetic SKU cannot take a sensor, and the air cushion only decelerates; it will not hold a load on air loss.
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X1000 Technical Specifications
| Model | Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X1000 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | B06-SAID100X1000 |
| Bore size | Ø100 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The B06-SAID100X1000 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The B06-SAID100X1000 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X1000
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X1000 Is Used
Battery Cell Stacking
Equal both-ways force drives precise cell stacking and unstacking in module assembly, preventing rotational drift during vertical positioning.
Pack Handling Transfer
Dual rods drive two synchronized pushers to move battery packs between conveyors, ensuring parallel transfer without skewing.
Tab Welding Clamp
The exiting back rod mounts a cam for a remote sensor, verifying clamp position during automated battery tab welding.
Replacing the Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X1000 with the B06-SAID100X1000
To replace the discontinued B06-SID100X1000, specify the SAID100X1000, which matches the ISO 15552 mounting, G1/2 port, and 1000mm stroke. Because force is equal both ways, you can size bidirectionally: the 100mm bore yields 3681 N at 0.5 MPa, while the neighboring 80mm bore yields 2268 N and the 125mm yields 5734 N. A double rod is right when you need anti-rotation, a back rod to carry a sensor cam, or to drive two tools. Reuse FA, LB, or TC mounts. For this 1000mm stroke, use external guides to prevent rod bending. As a non-magnetic SKU, it cannot take switches; for load holding, use an external rod lock or SAIL/BSAI variant.
Replacement checklist
- ✓ Same ISO 15552 interface → B06-SAID100X1000
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac B06-SID Battery Dedicated ISO Standard Cylinder B06-SID100X1000 FAQ
Yes, the SID line is discontinued. The direct replacement is the SAID100X1000. The B06- prefix designates the battery-manufacturing dedicated variant, and the SAID is mechanically identical with the same ISO 15552 interface, G1/2 port, and equal both-ways force.
Force is equal both ways at 3681 N @0.5 MPa, 5153 N @0.7 MPa, and 6626 N @0.9 MPa. The air port is G1/2. Speed is 30-800 mm/s. The cushion only decelerates; use an external rod lock for load holding.
Related AirTAC SAI Cylinders
Request a Quote for the B06-SAID100X1000
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAID100X1000 replacement — usually within 7-8 hours.